Ahmad Darabi

Faculty of Electrical

University:
Research Interests:
Professional & Scientific Membership:
Awards & Patents:
Biography (About):


Tel: 02332392204-9
Ext.Tel: 3219

Courses Taught

Ph.D
Ms.c
Bs.c

Thesis

All Thesis (71)
MohammadMahdi Sadeghi (2021), "Modeling and Design and Manufacture of an Electrostatic Machine for Speed Measuring Application", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors],
Reza Mirzahosseini (2020), "Determination of optional parameters and optimal design of multilxayer axial flux permanent magnet motor", Ph.D Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors], Mohsen Assili[Advisor/ Advisors]
Hamid Behzad (2019), "Fault Detection in Polytopic LPV Systems using Dissipativity Theory", Ph.D Thesis, Shahrood University Of Technology, Mohammad Ali Sadrnia[Supervisor/Supervisors], Ahmad Darabi, Amin Ramezani[Advisor/ Advisors]
Fazel Pourmirzaei Deylami (2019), "Modeling and Characterization of a Synchronous Variable-Capacitance Electrostatic Motor", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors],
Zahra Pezeshki (2018), "Energy modeling for estimation of indoor temperature of the building on the BIM platform", Msc Thesis, Shahrood University Of Technology, Ali Solyemani Aiouri[Supervisor/Supervisors], Ahmad Darabi[Advisor/ Advisors]
poria soheili (2018), "Design, modeling and prototyping of a dual-rotor axial-flux induction motor with independent bearings", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors],
Ali Behniafar (2017), "Design and Performance Analysis of Disc Type PMHS Motor", Ph.D Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors],
Mohammadreza Baghayipour (2017), "Vibrations and Acoustic Noise Modelling and Optimal Design of an Axial Flux Permanent Magnet Motor", Ph.D Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors], Ali Dastfan[Advisor/ Advisors]
Shima Gooyamofrad (2017), "Optimal Design of a Three-Phase Flux-Switching Permanent Magnet Motor in Order to Reduce the Cogging Torque", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors], Amir Hassannia[Advisor/ Advisors]
Vahid Mansouri Fard (2017), "Design, Manufacturing and Performance testing of a Reluctance Coilgun ", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors], Amir Hassannia[Advisor/ Advisors]
Mostafa Sharifi (2017), "Design, manufacturing and performance testing of an induction coilgun", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors], Amir Hassannia[Advisor/ Advisors]
Azam Ebadian (2017), "Optimization of charging an electric vehicle system in an isolated network containing distributed generation Resources", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors], Amir Hassannia[Advisor/ Advisors]
Amin Nobahari (2016), "Design and Modeling of Double Rotor Axial Flux Induction Motor", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors], Amir Hassannia[Advisor/ Advisors]
Fatemeh Kafash Farimani (2016), "Force Ripple Reduction of a Double-Sided Permanent Magnet Linear Synchronous Motor", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors], Amir Hassannia[Advisor/ Advisors]
Hadi Karimi Ali Abad (2015), "Modeling and Design of Cage for a Permanent Magnet Synchronous Machine", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors],
Saeed Akbarpour (2015), "Analysis and comparison of acoustic noise characteristics of a wound-rotor induction motor and a synchronous motor", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors], Hosein Marvi[Advisor/ Advisors]
Masoume Mohammadi (2015), "Optimal Design of Damper Shield for a Superconducting Synchronous Machine", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors], Amir Hassannia[Advisor/ Advisors]
Amir Hassannia (2014), "Modeling, Design and Performance Analysis of a Superconducting Synchronous Machine", Ph.D Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors], Mohammad Ebrahim Ghazi[Advisor/ Advisors]
Nasser Talebi (2014), "Design of Fault Detection and Isolation Systems for Wind Turbines", Ph.D Thesis, Shahrood University Of Technology, Mohammad Ali Sadrnia[Supervisor/Supervisors], Ahmad Darabi[Advisor/ Advisors]
Hosein Ajam Ekrami (2014), " Modelling and an Investigation on short Over-Excitation of a Multi-phase Hysteresis Motor", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors],
Mohammad Hadi Ebrahimi (2014), "Design, Modeling and Analysis of Multi-Phase Axial Flux Hybrid PM-Hysteresis Motor ", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors],
Adel Mohamadi (2014), "Design of Optimal Intelligent Controller for Permanent Magnet Synchronous Motor", Ph.D Thesis, Shahrood University Of Technology, mohammad Haddad Zarif[Supervisor/Supervisors], Ahmad Darabi, Mohsen Farshad[Advisor/ Advisors]
Noushin bahador (2013), "Demagnetization Analysis of Axial Flux and Transvere Flux Permanent Magnet Motors ", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors], Hassan Hassanabadi[Advisor/ Advisors]
soheil abdolahi (2013), "Design of number of multi-laxyer axial flux permanent magnet laxyers", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors],
Mohsen nikkhou (2013), "Choose of Frequency and Number of Phases for Low Speed Axial Flux Permanent Magnet Machine Design ", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors],
Mehdi Kashani (2012), "Design of a Multy Phase Synchronous Motor with High Temperature Superconductive Field Windings ", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors], Ahmad Madadi[Advisor/ Advisors]
Kave sarafan (2012), "Calculation of loss and temperature distribution of Axial Flux Permanent Magnet Machine (AFPM)", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors], Mahmood Mehregan[Advisor/ Advisors]
Mohammad Mohiti (2012), "Under Frequency Load Shedding in Microgrid with the Presence of Distributed Generation Resources", Msc Thesis, Shahrood University Of Technology, Mahdi Banejad[Supervisor/Supervisors], Ahmad Darabi[Advisor/ Advisors]
Vahid Reza Nikzad (2011), "", Msc Thesis, Shahrood University Of Technology, Ali Dastfan[Supervisor/Supervisors], Ahmad Darabi[Advisor/ Advisors]
Ali Asghar Rahimi (2011), "Simulation and Control Performance of a Permanent Magnet Linear Synchronous Motor (PMLSM) and Drive", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors], [Advisor/ Advisors]
nima nabizade (2011), "", Msc Thesis, Shahrood University Of Technology, Ali Dastfan[Supervisor/Supervisors], Ahmad Darabi[Advisor/ Advisors]
saber naghdi ganji (2011), "Modeling and Control of Wind-Turbine Used DFIG under Network Fault Conditions", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors], Mohsen Assili[Advisor/ Advisors]
Aliasghar sedaghati (2011), "Assessment the Methods Of Reduce the Distributed Generation Effect on OCP Schemes in Radial Feeders", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors], Mohsen Assili[Advisor/ Advisors]
Hassan Moradi (2011), "Modeling, Design and Optimization of Axial Flux Permanent Magnet (AFPM) Machines", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors],
EHSAN JAVAN (2011), "Control and Simulation of a Dobly-Fed Induction Generator under Unbalanced Grid Voltage Conditions", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors], Mohsen Assili[Advisor/ Advisors]
Ali Sanchuli (2011), "Detection of single phase to ground fault in shipboard power system", Msc Thesis, Shahrood University Of Technology, Mahdi Banejad[Supervisor/Supervisors], Ahmad Darabi, Alireza Ahmadifard[Advisor/ Advisors]
Morteza Azadi (2010), " Modeling, Simulation and Operational Characteristics Analysis of a Brushless DC Motor and Drive", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors], Ali Dastfan[Advisor/ Advisors]
Ali Moeini (2010), "Loss of Main Detection in a Distribution ", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi, seyyed Mohammad Reza Rafie[Supervisor/Supervisors],
Mehdi Javadi (2009), "", Msc Thesis, Shahrood University Of Technology, Mohammad Ali Sadrnia[Supervisor/Supervisors], Ahmad Darabi[Advisor/ Advisors]
Mohsen Khosravi (2009), "Analizing of the Transformer Performance baxsed on Nonlinear and Multi-Values Persiach Model", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors],
Amir Hoseyn Kheibari (2008), "Evaluation of Dynamic Transient Parameters of a Synchronous Machine using FE", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors],
Mehdi Siyahi (2008), "Fault Tolerant Control Systems, case study Unmanned Aircraft", Ph.D Thesis, Shahrood University Of Technology, Mohammad Ali Sadrnia[Supervisor/Supervisors], Ahmad Darabi[Advisor/ Advisors]
Mohsen Sanati Moghadam (2008), "Design and Modeling of Disc Type Dual Rotor Synchronous Hysteresis Motor", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors], Hamid Lasani[Advisor/ Advisors]
Ali Sarikhani (2007), "", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi, Mahdi Banejad[Supervisor/Supervisors],
Mohammad sharif Toorani (2007), "", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi, Ali Solyemani Aiouri[Supervisor/Supervisors],
Mehdi Sadi (2007), "", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors],
Teymur Ghanbari Hashemabadi (2007), "", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi, seyyed Mohammad Reza Rafie[Supervisor/Supervisors],
Payam Puriaye Vali (2006), "Power and Voltage fluctuation on Wave Power Plants", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors],
Ahmad Asgarinej (2005), "Iron loss evaluation of an electrical machine by use of Finite Element Technique", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi, Mohammad Ebrahim Ghazi[Supervisor/Supervisors],
Hasan AfsharPur (2005), "", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi, Mohammad Ali Sadrnia[Supervisor/Supervisors],
Alireza Shabani (2005), "", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi[Supervisor/Supervisors],
Ali Taghavi (2004), "", Msc Thesis, Shahrood University Of Technology, Ahmad Darabi, Ali Solyemani Aiouri[Supervisor/Supervisors],

Publications

Journal Papers
Conference Papers
Book