Vahid reza Kalat Jaari

Associate Professor Faculty of Civil & Architectural Engineering

Ph.D. in civil Engineering Structural Engineering

University: Shahood University of Technology
Research Interests: Structural Optimization,Reliability of Structures
Professional & Scientific Membership:
Awards & Patents:
Biography (About):


Tel:
Ext.Tel:

Scientometrics

Courses Taught

Bs.c

Thesis

All Thesis (69)
(2024), "Experimental and Numerical Investigation of the Cold Joints Effects on the Seismic Behavior of Reinforced Concrete Moment frxames Subject to Cyclic Loading", Ph.D Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors], ebrahim Zamani Beidokhti[Advisor/ Advisors]
Seyedeh Maryam Dashti Zand (2023), " Experimental Study on Steel Trapezoidally Corrugated Shear Walls Reinforced with Flat Plate Under Cyclic Loading", Ph.D Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari, [Supervisor/Supervisors],
(2021), "Optimization of location,topology and number of bracing spans in steel structures using multi mexta-heuristic baxsed search method and dynamic constraints", Ph.D Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors], [Advisor/ Advisors]
(2021), "Topology and Geometry Optimization of STMF for Seismic Performane Improvement Using Island Genetic Algorithm", Ph.D Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors], Hossein Pahlavan[Advisor/ Advisors]
Hamidreza Irani (2020), "Optimization of 3D Steel Moment frxames baxsed on Modified Reliability Using Genetic Algorithm", Ph.D Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors], Mohamad Hosein Dibaei Bonab[Advisor/ Advisors]
(2020), "Retrofitting of reinforced concrete frxames with cable bracing system and determining the suitable post-tensioning and arrangement of cables", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors],
Amir Aghdassi (2020), "Determination of pre-stress force and optimum arrangement of cables in simple steel frxames using mexta-heuristic methods", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors], [Advisor/ Advisors]
Seyed Ali Ghazi Mirsaeed (2019), "Numerical Analysis of Viscoelastic and Elastostatic problems incorporating novel proposed interpolation functions using FEM and BEM", Ph.D Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors],
Matin Khormali (2019), "Seismic behavior of reinforced concrete frxames repaired with new concrete", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors],
Mohammad Irvani (2019), "Evaluation of Seismic Performance of “SST” Partially restrained Connection for Iranian Steel Section's", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors], Pouyan Boroumand[Advisor/ Advisors]
Ehsan Karimi (2019), "The Effect of Cold-Joint on Behavior of Reinforced Concrete Moment Resisting frxame Under Monotonic Loads Using The Nonlinear Finite Element Method ", Ph.D Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors],
Amirhossein Ebrahimi (2018), "Investigation on Seismic Performance of Recycled Aggregate Concrete frxames", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors], Mohammadi Abbas[Advisor/ Advisors]
Mahmood khormani (2018), "Determination of compressive strength of concrete specimen using image processing and FEM", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari, Iman Aghayan[Supervisor/Supervisors], Alireza Ahmadifard[Advisor/ Advisors]
Amir Ziaeifard (2018), "Probabilistic assessment of seismic performance of buildings with hybrid structure RCS by fragility curves", Msc Thesis, Shahrood University Of Technology, Hossein Pahlavan, Vahid reza Kalat Jaari[Supervisor/Supervisors], Ali Naseri[Advisor/ Advisors]
hossein ezati (2017), "determination of propose corrugated element stiffness matrix corrugated and its application in corrugated steel shear walls", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari, Seyed Mehdi Tavakkoli[Supervisor/Supervisors],
Omid Kalantari (2017), "Study on performance of corrugated steel plate shaer wall reinforced with steel plats", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari, mohammad Shamekhi Amiri[Supervisor/Supervisors],
Amir Khani (2017), "Evaluation of K factor in self-consolidating concrete containing natural and artificial Pozzolan", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari, Mohsen Tadayon[Supervisor/Supervisors], Mohamad Sajjadi Attar[Advisor/ Advisors]
Mohammad Amin Salehi (2017), "Investigation on Torsional Rigidity of Common Connections in Iranian Steel Structures ", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors], Mahdi Gerdooei[Advisor/ Advisors]
Nahid Soufivand (2016), "Optimization Woffle Slab's use the Integrated Force Method and Genetic Algorithm", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors], Mohammad Hossein Talebpour[Advisor/ Advisors]
Hosein Nasiri (2016), "Investigation of seismic behavior of steel moment frxames Braced by pre-stress steel cables", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors],
Morad Pourabbasali Omran (2016), "Assessment of the Behavior of RC frxames with Steel X-braced by IDA Analysis", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors],
Javad Torkashvand Safaee (2016), "Analysis And Optimization Of Diversion Tunnel’s Reinforced Concrete Lining In Bakhtiyari Dam", Msc Thesis, Shahrood University Of Technology, Seyed-Mohammad Esmaeil Jalali[Supervisor/Supervisors], Vahid reza Kalat Jaari[Advisor/ Advisors]
Saeid Sahraie (2016), "The shape and type of coupling beam on the seismic behavior of coupled steel shear walls", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors],
mehdi bagherinezhad (2015), "", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors],
Mahin Reihani (2015), "Reliability analysis of steel beam-columns under biaxial bending designed baxsed on Iran standard", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors],
Kiarash Biabani Hamedani (2015), "Reliability-baxsed Size and Geometry Optimization of Trusses Using Genetic Algorithm", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors],
Maryam Moghimi (2015), "Investigation and Improvement of Seismic Performance of Con-XL Moment Connection for Iranian Steel Section's", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors], Ali Keyhani[Advisor/ Advisors]
Ahmad Gerivani (2015), "Investigation and Improvement of Seismic Performance of Kaiser Bolted Bracket Moment Connection for Iranian Steel Section's", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors], Ali Keyhani[Advisor/ Advisors]
Mohsen rezapour (2015), "Composite Floor With Two-way Performance", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors],
Majid Ehsanbagha (2015), "Retrofitting walls of masonry structures by post-tentioning", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors],
(2014), "", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors],
Javad Nasrolahzadekapari (2014), " hysteresis behavior of rigid column-tree connection(with end plate prestresed bolts) and retrofit methods", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors],
M.kamel (2014), "Shape Optimization of Continuum Structures by Genetic Algorithm", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari, [Supervisor/Supervisors],
Zeynab Andarvare (2014), "Reliability of reinforced concrete columns confined with FRP, baxsed on Iran & US Design Codes", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari, Farshid Jandaghi Alaee[Supervisor/Supervisors],
Mehdi Sharafi (2013), "Optimization of effectiveness parameter on strength and stiffness of cobiax floor", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors], Seyed Mehdi Tavakkoli[Advisor/ Advisors]
(2013), "Seismic Performance Improvement of Truss Moment frxames Using Analysis Non-linear Static (Push Over) and Genetic Algorithm", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors], [Advisor/ Advisors]
Saeid shakibamehr (2013), "Code Calibration of IRANIAN,S Steel Structures (LRFD Method) by Reliability and GA Algorithm", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors],
Morteza Shabestani (2013), "Reliability-baxsed optimization of Steel moment frxame structures using developed genetic algorithm", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors], Ali Keyhani[Advisor/ Advisors]
(2012), "", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors], [Advisor/ Advisors]
(2012), "", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors], [Advisor/ Advisors]
Ali Neghi zadeh (2012), "baxse Level Evaluation in Structures With Different Foundation Levels by Soil-Foundation-Structure Interaction", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari, Reza Naderi[Supervisor/Supervisors], [Advisor/ Advisors]
Ali Molaei (2012), "Combinatorial structural optimization method baxsed on LP and GA methods", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors], Mohammadi Abbas[Advisor/ Advisors]
(2012), "", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari, [Supervisor/Supervisors],
Hadi Einabadi (2012), " Determination of optimum geometry of RBS connections for seismic improvement of steel structures", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors], Ali Keyhani[Advisor/ Advisors]
Seyed Poria Kazemi (2012), " The Effect of Structure Geometry on Response Modification Factor of Moment frxame 2D & 3D", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors],
Yousef Haghgoo (2012), " Investigation on the seismic behavior of hollow concrete shear walls", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari, [Supervisor/Supervisors], Ali Keyhani[Advisor/ Advisors]
Ehsan rezvani ahangarkolaee (2012), "Effect of progressive collapse phenomenon in steel moment frxames", Msc Thesis, Shahrood University Of Technology, Ali Keyhani[Supervisor/Supervisors], Vahid reza Kalat Jaari, Hamidreza Tavakoli[Advisor/ Advisors]
Mohammad Reza Molleai (2012), " Experimental Investigation of influence of Nano-Silica Particles on Mechanical Properties of Self-Compacting Concrete", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari, [Supervisor/Supervisors],
Pooria Mansoorian (2011), "Element and Structural system reliability-baxsed optimization of steel trusses using developed genetic algorithm ", Ph.D Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors],
Hossein Mohammadirad (2011), " Investigation on behaviour of infills retrofitted with fiber reinforced polymer (FRP)", Msc Thesis, Shahrood University Of Technology, [Supervisor/Supervisors], Vahid reza Kalat Jaari[Advisor/ Advisors]
Komeil Karimi (2011), "Requirement parameters to determine R factor of infilled frxames", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari, [Supervisor/Supervisors], [Advisor/ Advisors]
Armin Badakhshan (2011), "", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors], Sirus GholamPur[Advisor/ Advisors]
Rastin Rehimian (2011), "Analysis of Rigidity of Filler-Joint Floors and Transfer of Earthquake Forces to the Lateral Load Bearing Elements within the Elastic Behavior Range ", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors], Mohammadi Abbas[Advisor/ Advisors]
Mohsen Ebrahimian (2010), "Master of Science Thesis Civil & Structure Engineering", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors], Ali Keyhani, mansoorian pourya[Advisor/ Advisors]
Mohsen Golzar (2009), " Optimization of Water Distribution Network using Genetic Algorithm", Msc Thesis, Shahrood University Of Technology, Seyed Fazlolah Saghravani, Vahid reza Kalat Jaari[Supervisor/Supervisors],
Gholamhosein khajavi fakhredavoud (2009), "The use of tuned mass dampers to control floor vibration of non industrial buildings", Msc Thesis, Shahrood University Of Technology, Ali Keyhani, Vahid reza Kalat Jaari[Supervisor/Supervisors],
SALEH HAGHPARAST (2009), "Shape And Sizing Optimization of Space Structure by Genetic Algorithm", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors], [Advisor/ Advisors]
Morteza Habibi (2009), "Finite Element Analysis of Crack Due to Corrosion in Reinforced Concrete Beams", Msc Thesis, Shahrood University Of Technology, [Supervisor/Supervisors], Vahid reza Kalat Jaari[Advisor/ Advisors]
AMIN NOORYAN (2009), "Sizing Optimization of portal Gable frxame with Tapered Member by Genetic Algorithm", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors], [Advisor/ Advisors]
mohamadhosein talebpour (2008), "Optimization of Sizing and Topology of Trusses by Advanced GA Methods", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors], [Advisor/ Advisors]
Mohsen Dezyani (2007), "", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors],
Meysam Rezaei (2007), "Shape Optimization of Shell Structures with Mathematical Programming and Calculation of Natural Frequencies of Free Vibration of Shells", Msc Thesis, Shahrood University Of Technology, Behruz Hasani[Supervisor/Supervisors], Vahid reza Kalat Jaari[Advisor/ Advisors]
Puria Mansurian (2006), "", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors], Mohsen Talebzadeh[Advisor/ Advisors]
Hamed Valizadeh (2006), "Optimization of Sizing And Topology of Braces in 3D-frxame Structures by GA", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors], Farnoosh Basaligheh[Advisor/ Advisors]
Ehsanollah Zeyghami (2005), "Sizing, Shape and Topology Optimization of Trusses Using Genetic Algorithm and Matlab", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors], Ali Keyhani[Advisor/ Advisors]
Keyvan Vahedi (2005), "", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors],
Mehdi Jamaklu (2005), "", Msc Thesis, Shahrood University Of Technology, Mohsen Talebzadeh[Supervisor/Supervisors], Vahid reza Kalat Jaari[Advisor/ Advisors]
Mohammad Sajadi (2004), "Effect of Steam Curing on Concrete Durability", Msc Thesis, Shahrood University Of Technology, Mohsen Tadayon, Vahid reza Kalat Jaari[Supervisor/Supervisors],
Mohsen Harati (2004), "Reliability Assessment Of Concrete Structures Designed By ABA & ACI Codes", Msc Thesis, Shahrood University Of Technology, Vahid reza Kalat Jaari[Supervisor/Supervisors], Ali Keyhani[Advisor/ Advisors]

Publications

Journal Papers
Conference Papers
Book