Mahmood Norouzi

Professor Faculty of Mechanical Engineering

Ph.D. Energy Conversion

University: Joint Program (Shahrood University of Technology and Amirkabir University of Technology)
Research Interests: Non-Newtonian Fluid Mechanics, CFD, Heat Transfer in Anisotropic Media, Numerical and Analytical Methods in Fluid Mechanics
Professional & Scientific Membership: Member of Rheology Society, Member of Iranian Association of Elites
Awards & Patents: Research award and grant of young assistant professor from National Elites Foundation of Iran (2012), Superior research award of Semnan state (2017), Superior teaching awards of Shahrood University of Technology for nine consecutive years (Since 2011-2019), Superior research awards of Shahrood University of Technology for seven consecutive years (Since 2012-2019), The first rank in the entrance exam of Ph.D. degree (2005), Superior research award for graduate students (2009).
Biography (About):
Please refer to my CV.

Tel:
Ext.Tel:

Scientometrics

Google Scholar
(Update: 2024-Sep-23)
2789

Citations

30

h-index

76

i10-index

52

Co-authors

Scopus
(Update: 2024-May-07)
1790

Citations

24

h-index

136

Co-authors

76

Documents

Courses Taught

Ms.c
Bs.c

Thesis

All Thesis (91)
Amirhossein Adibimanesh (2024), "Experimental analysis of Newtonian drop Dynamics in viscoelastic media", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors], Dr. Mohammad Hassan Kayhani[Advisor/ Advisors]
Mohammad Reza Kord (2024), "Numerical investigation of viscoelastic fluid flow into a hyperbolic wavy Hele-Shaw cell", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi, Mohammad Mohsen Shahmardan[Supervisor/Supervisors],
Mohmmad Hossein Izadifard (2023), " Preparation, Rheological Characterization and Modeling of Anisotropic Magnetorheological Elastomers under Shear Loading", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors], Mojtaba Ghatee, Mohammad Bagher Nazari[Advisor/ Advisors]
Mohammad Mohammadi (2023), "Experimental Study of Bubble Rising in Boger Fluids ", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi, Mohsen Nazari[Supervisor/Supervisors], Pooria Akbarzadeh[Advisor/ Advisors]
Seyed Mostafa Mirtabaei (2023), "Numerical study of two-phase flow in porous media micro-models with Enhance Oil Recovery", Ph.D Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors], Mohsen Nazari[Advisor/ Advisors]
Amirmasoud Alimardan (2023), "Dynamic characterization and modeling of anisotropic magnetorheological elastomers under tensile-compressive loadings", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors], Mojtaba Ghatee, Mohammad Bagher Nazari[Advisor/ Advisors]
Seyyed Amirreza Vaziri (2023), " Analytical and numerical study of flow and heat transfer of conical magnetorheological bearing", Ph.D Thesis, Shahrood University Of Technology, Mahmood Norouzi, Pooria Akbarzadeh[Advisor/ Advisors]
(2022), " Laboratory study of the collision of non-Newtonian fluid droplets containing spiral micelles with a solid surface", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors],
(2022), "Numerical investigation of particle separation within a microchannel using a magnetic field induced by electric current wires", Msc Thesis, Shahrood University Of Technology, Mohsen Nazari, Mahmood Norouzi[Supervisor/Supervisors],
(2022), "Transient heat transfer from a falling solid sphere at low Reynolds numbers", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi, Mohammad Mohsen Shahmardan[Supervisor/Supervisors],
(2022), "Microstructural study of magnetorheological fluids by DEM-CFD Simulation in Shear flow", Msc Thesis, Shahrood University Of Technology, Ali Khaleghi, Ahamad Nazari[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
(2022), " A numerical investigation on instability of viscoelastic fluid flows around a sphere ", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi, Ali Abbas Nejad[Supervisor/Supervisors], [Advisor/ Advisors]
Masume Amerian (2022), " Investigating the effect of vacuum pressure parameters, filling ratio and length ratio of evaporator and condenser on the performance of pulsating heat pipe using experimental method", Msc Thesis, Shahrood University Of Technology, Ali Khaleghi[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
Massoumeh Natani (2022), "Numerical study of air ventilation in a saloon train cabin to reduce the risk of COVID 19 spread", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors], Ahamad Nazari[Advisor/ Advisors]
Sajad Siavoshian (2021), "Investigating the combination of tangential and Impingement jets for improving the cooling of the leading edge of the gas turbine blade", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
Hamidreza Ghiyasi Shahraky (2021), "The development of power-law preconditioning approach for numerical analysis of unsteady viscoelastic flows ", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi, Ali Abbas Nejad[Supervisor/Supervisors], Pooria Akbarzadeh[Advisor/ Advisors]
Mohammadreza Rahimzadeh (2021), "A numerical study on thermal Saffman-Taylor instability in porous media for non-Newtonian fluids", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi, Mohammad Mohsen Shahmardan[Supervisor/Supervisors],
Amir Hossein Hajei Aghaei (2021), "Analytical Analysis of Flow and Heat Transfer in Triangular Ducts Using Ritz Method ", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani, Mahmood Norouzi[Supervisor/Supervisors],
(2021), "An analytical solution for flow and heat convection of viscoelastic fluid inside the straight rectangular ducts", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
(2021), " Numerical and experimental investigation on the impact of drop onto the fluid film in viscoelastic fluids", Ph.D Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors], Dr. Mohammad Hassan Kayhani, [Advisor/ Advisors]
Mohammad Reza Attari (2020), "Numerical study on the effect of oscillatory cooling flow with different arrangement of injection hole placement on the film cooling effectiveness of gas turbines ", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors], Dr. Mohammad Hassan Kayhani[Advisor/ Advisors]
Mohammad Mehdi Zolfagharian (2020), "Parametric Investigation, Optimal Design, Manufacturing and Testing of Magnetorheological Damper", Ph.D Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
Amirhossein Yghoobi (2020), "Experimental investigation of the effect of shape factor on storage and loss coefficients of MR Elastomers and system identifications of these coefficients", Msc Thesis, Shahrood University Of Technology, Amir Jalali, Mahmood Norouzi[Supervisor/Supervisors], Mojtaba Ghatee[Advisor/ Advisors]
Reza Ghasemi (2020), "An experimental study on the collapse of spherical body in Newtonian and non-Newtonian fluids", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors], Pooria Akbarzadeh, Mohsen Nazari[Advisor/ Advisors]
Alireza Bakhshinejad Bahambari (2020), "Numerical study on the effect of trench Geometry with changing shape of trench lip on the film cooling effectiveness of gas turbines", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
Amin Razi (2020), "Numerical study to improve heat transfer of the gas turbine blade cooling over the tip-wall of the two-pass channel using a combination of Fin, Dimple and proturtion techniques", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
Reza Afrooz (2020), "Numerical study on the influence of shaped holes and swirl coolant flow on film cooling effectiveness", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors], Dr. Mohammad Hassan Kayhani[Advisor/ Advisors]
(2020), "Investigation of foam injection on viscose fingering control in oil tanks", Ph.D Thesis, Shahrood University Of Technology, Mohammad Mohsen Shahmardan[Supervisor/Supervisors], Mahmood Norouzi, Mohsen Nazari[Advisor/ Advisors]
Mohsen Ghafarian Eidgahi Moghadam (2019), "Simulation of flow inside MR damper by using dissipative particle dynamics method", Ph.D Thesis, Shahrood University Of Technology, Mohammad Mohsen Shahmardan[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
Seyyed Hossein Hasani (2019), "Numerical analysis of flow structure and heat transfer characteristics in a rectangular cooling channel (AR=3:1) in gas turbine blades with V-shaped dimples and protrusions", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors], Dr. Mohammad Hassan Kayhani[Advisor/ Advisors]
Pouya Pouyaei (2019), "A Numerical study for improvement of thermal performance of gas turbine blade internal cooling in multi-pass channel", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
Alireza Bagheri (2019), "An experimental investigation on magnetorheological fluids stability baxsed on Surfactants ", Msc Thesis, Shahrood University Of Technology, Ali Khaleghi, Mahmood Norouzi[Supervisor/Supervisors], Mojtaba Ghatee[Advisor/ Advisors]
Banafsheh Norouzi (2019), "Modeling of fluid-structure interaction due to fluid hammer with viscoelastic fluid ", Ph.D Thesis, Shahrood University Of Technology, Ahmad Ahmadi[Supervisor/Supervisors], Mahmood Norouzi, Mohsen Lashkarblouk[Advisor/ Advisors]
Seyed Hashem Abadi (2019), "Analytical Solution of Heat Transfer in Heterogeneous Spherical Composite Pressure vessels", Msc Thesis, Shahrood University Of Technology, Ali Khaleghi, Mahmood Norouzi[Supervisor/Supervisors],
Ali Abbaspur (2019), "Analysis of viscoelastic lubrication for journal bearing using the Giesekus model ", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors], Pooria Akbarzadeh[Advisor/ Advisors]
Mohammad Sadegh Moghaddas (2019), "A numerical study of various crescent ribs geometry on the way of a fluid flow passing in a square channel in a gas turbine blade to enhance cooling and heat transfer", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors], Dr. Mohammad Hassan Kayhani[Advisor/ Advisors]
Mohammad Khosravi (2019), "Numerical study on the arrangement and shape of the ribs to increase the heat transfer in the internal cooling path of the gas turbine blades using LES method", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors], Dr. Mohammad Hassan Kayhani[Advisor/ Advisors]
Ayoub Paseban (2019), "Technical and economic feasibility of using natural gas in locomotives", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors], Ali Khaleghi[Advisor/ Advisors]
Ahmad Kazemi (2018), "Experimental investigation of immiscible viscouse fingering of viscoelastic fluids in porouse media", Msc Thesis, Shahrood University Of Technology, Ali Abbas Nejad, Mahmood Norouzi[Supervisor/Supervisors],
Hashem Dianati Nick (2018), "Design, fabrication and test of a Magnetorheological Elastomer (MRE) engine mount", Msc Thesis, Shahrood University Of Technology, Amir Jalali, Mahmood Norouzi[Supervisor/Supervisors], Mojtaba Ghatee[Advisor/ Advisors]
Mostafa Rahimi (2018), "Experimental investigation of Darcy-Oldroyd model for Boger fluids in a porous media", Msc Thesis, Shahrood University Of Technology, Ali Abbas Nejad, Mahmood Norouzi[Supervisor/Supervisors],
Babak Erfan Manesh (2018), "An exact analysis of heat transfer in heterogeneous composite conical shells ", Msc Thesis, Shahrood University Of Technology, Mohammad Mohsen Shahmardan[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
Morteza Nayebipour (2018), "Numerical study of flow and heat transfer of viscoelastic fluid around a circular cylinder", Msc Thesis, Shahrood University Of Technology, Ali Abbas Nejad[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
Seyyed Hossein miri sangtarashani (2018), "Numerical investigation Three-dimensinal of heat transfer enhancement from rotating gas turbine blade", Msc Thesis, Shahrood University Of Technology, Ali Khaleghi[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
Seyed Majid Khatibi (2017), "An experimental investigation on viscous fingering instability of Newtonian and Non-Newtonian fluids in transparent porous media with compact structure consisting of glass beads", Msc Thesis, Shahrood University Of Technology, Ali Khaleghi[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
Reza Mahmoodi Targhi (2017), "Primary design of the heat exchanger in organic Rankine cycle (ORC) for improve the electricity production from waste heat", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi, [Supervisor/Supervisors],
Amir Hossein Heydari Dehnavi (2017), "Investigating the turbine rule in primary design of the electric energy production from ORC cycle", Msc Thesis, Shahrood University Of Technology, , Mahmood Norouzi[Supervisor/Supervisors], Ali Khaleghi[Advisor/ Advisors]
Mohammadkazem Sheykhian (2017), "Experimental study of Newtonian and non-Newtonian droplet collision on inclined solid surface", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi, Mohammad Mohsen Shahmardan[Supervisor/Supervisors],
Saeed Bahrami (2017), "A numerical study on hemodynamic parameters of atherosclerosis using the fluid-structure interaction ", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors],
Sedigheh Dorrani (2017), "Thermal viscous fingering in porous media", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors],
Hosna Shokri (2017), "Numerical Simulation of Fingering Instability for Viscoelastic Fluids Used in Enhanced-Oil-Recovery Operations", Ph.D Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
Alie Abbasi (2017), "Numerical investigation of viscous fingering instability in immiscible viscoelastic fluid", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors],
Hossein Abdolnezhad Baghlojeh (2016), "Experimental investigation of non-Newtonian drop deformation in a viscous fluid", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors],
Danial Cheraghali (2016), "Numerical investigation of non-newtonian blood flow through multilxayer stenosis vessels with casson model", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors], Ali Abbas Nejad[Advisor/ Advisors]
Ehsan kiyumarsi (2016), "Parametric dynamic modeling and control of magnetorheological damper, considering temperature effects", Msc Thesis, Shahrood University Of Technology, Amir Jalali, Mahmood Norouzi[Supervisor/Supervisors], Mojtaba Ghatee[Advisor/ Advisors]
Seyed Zia Daghighi (2016), "Analytical Solution to Forced Convection Heat Transfer of non-Newtonian Fluid Flow through Straight Pipes", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors],
Amin Emamian (2016), "An analytical investigation on shape of a falling viscoelastic drop at low Reynolds number", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors], Mahdi Davoodi[Advisor/ Advisors]
Ali Majd (2015), "Modeling of unsteady flow with non Newtonian fluid with fluid-structure interaction in pipe system", Ph.D Thesis, Shahrood University Of Technology, Ahmad Ahmadi[Supervisor/Supervisors], Alireza Keramat, Mahmood Norouzi[Advisor/ Advisors]
Saeed Vaezi (2015), "Experimental Investigation of Elastic Properties Effects on Viscous Fingering Instability", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi, Ali Jabari Moghadam[Supervisor/Supervisors], Mojtaba Ghatee[Advisor/ Advisors]
Mohammad Halimi (2015), "Experimental Investigation of Two Phase Flow Regime and its Effect on the Performance of Pulsating Heat Pipes", Msc Thesis, Shahrood University Of Technology, Ali Abbas Nejad[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
Amir Komeili Birjandi (2015), "An investigation on non-Newtonian drop formation in dripping regime", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani, Mahmood Norouzi[Supervisor/Supervisors],
Roghayeh Saemi (2015), "Numerical Investigation of 3D Viscoelastic Fluid Flow and Heat Transfer in Curved Ducts", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
Mohammad Hadi Sedaghat (2015), "Numerical investigation the effect of rheologic properties on Muco-ciliary transport", Msc Thesis, Shahrood University Of Technology, Mohammad Mohsen Shahmardan[Supervisor/Supervisors], Mahmood Norouzi, Mohsen Nazari[Advisor/ Advisors]
Mohammad amir hasani (2015), "Modeling the effect of polymeric additives to the fluid flow of", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors],
Arash Jafari Gharibvand (2015), "Magnetorheological fluid shear flow modeling by using dissipative particle dynamics method", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi, Mohammad Mohsen Shahmardan[Supervisor/Supervisors],
Hossein Vatandoost (2015), "Fabrication and modeling of magnetorheological elastomer (MRE)", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi, Mohammad Mohsen Shahmardan[Supervisor/Supervisors], Masud Jalali Alhashem[Advisor/ Advisors]
Ali Montahaee (2015), "The numerical investigation of viscoelastic fluid flow and heat transfer in axisymmetric sudden expansion", Msc Thesis, Shahrood University Of Technology, Mohammad Mohsen Shahmardan[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
Samira Mandani (2015), "An Experimental Investigation on Non-Newtonia Drop Impact onto Solid Surfaces", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi, Mohammad Mohsen Shahmardan[Supervisor/Supervisors],
Mehdi Gilani (2015), "Characterization and Modeling of Magnetorheological Elastomer under Compressive-Tensile Loadings ", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors], Seyed Masoud Sajjadi Alehashem[Advisor/ Advisors]
Ehsan Ghassabi (2015), "Experimental investigation on the breakup of viscoelastic liquid", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi, Mohammad Mohsen Shahmardan[Supervisor/Supervisors],
(2014), "", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi, Ali Jabari Moghadam[Supervisor/Supervisors],
Zakiye Talebi (2014), "Numerical Investigation of Fluid-Solid Interaction for Blood Flow through the Stenosis Vessels", Msc Thesis, Shahrood University Of Technology, Ali Abbas Nejad[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
Hamideh Delaram (2014), "Thermal Analysis and Layout Design for Power Inverter Module", Msc Thesis, Shahrood University Of Technology, Ali Dastfan[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
Sadegh Mohammadi (2014), "Design and Fabrication of Smart Damper with Magnetorheological Hydraulic Oil", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors], Mojtaba Ghatee[Advisor/ Advisors]
Mehdi Davoodi (2014), "An Analytical Study on Motion and Shape of Creeping Viscoelastic Drops Falling through Viscoelastic Media", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors],
Reza Rooki (2013), "Cuttings Transport Modeling of Underbalanced Drilling (UBD) Operation in Inclined Wellbores", Ph.D Thesis, Shahrood University Of Technology, Faramarz Doulati Ardejani, Ali Moradzadeh[Supervisor/Supervisors], Mahmood Norouzi, [Advisor/ Advisors]
Sharif Barati (2013), "Numerical Modeling of Carbon Dioxide Injection and Underground Storage- Case study: South West Khuzestan oil field", Msc Thesis, Shahrood University Of Technology, Ahmad Ramezanzadeh, Hossein Mirzaei Nasirabad[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
Ali Jafari (2013), " Numerical investigation for of 3D Taylor-Couette viscoelastic instability between concentric rotating cylinders ", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors],
Mohammadreza Shoghi (2013), "Numerical Investigation for Control of Viscous Fingering Instability in non-Newtonian Fluids", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors],
Sakineh Ammarlu (2012), " Numerical Simulation of Turbulent Flow in Non- Circular Ducts", Msc Thesis, Shahrood University Of Technology, Ramin Amini, Mahmood Norouzi[Supervisor/Supervisors],
Ali Jalali (2012), "Numerical simulation of 3D viscoelastic developing flow and heat transfer in the rectangular ducts", Ph.D Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
Amin Shahbani Zahiri (2012), "Numerical Investigation of Non-Newtonian Flow in Gradual Expansions", Msc Thesis, Shahrood University Of Technology, Mohammad Mohsen Shahmardan[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
Amin Shariatkhah (2012), "Numerical Investigation of Unsteady Viscoelastic Flows inside the Closed Channels", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors], [Advisor/ Advisors]
Hosna shokri (2012), "numerical investigation of fluid flow and heat transfer in a cavity with oblique boundaries using Lattice Boltzmann method", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani, Mahmood Norouzi[Supervisor/Supervisors],
Behrooz Zare (2012), "An analytical/experimental investigation of creeping viscoelastic drop falling through a liquid phase", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi, [Supervisor/Supervisors],
Amir Naghikhani (2012), "The numerical investigation of viscoelastic flow and heat transfer in cavity", Msc Thesis, Shahrood University Of Technology, Mohammad Mohsen Shahmardan[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
Aidin Nazemi (2012), "Numerical and analytical investigation of boundary laxyer flow of non-Newtonian fluids", Msc Thesis, Shahrood University Of Technology, Ali Jabari Moghadam, Mahmood Norouzi[Supervisor/Supervisors],
Sobhan Mosayebi (2011), "The numerical investigation of viscoelastic flow and heat transfer in sudden expansions and contractions", Msc Thesis, Shahrood University Of Technology, Mohammad Mohsen Shahmardan[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
Seyyed Rasoul Varedi (2011), " Numerical Investigation of Viscoelastic Flow around a Circular Cylinder", Msc Thesis, Shahrood University Of Technology, Mohamad Javad Maghrebi, Mohammad Mohsen Shahmardan[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
(2011), "", Msc Thesis, Shahrood University Of Technology, Ali Jabari Moghadam[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
Amin Amiri Deloei (2010), "", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]

Publications

Journal Papers
Conference Papers
Book