All Thesis (29)

Alireza Talebi (2019), "Study Of Stress Distribution around Quasi-Square Hole in Infinite Orthotropic-Viscoleastic Plate Under Axial loading", Msc Thesis, Shahrood University Of Technology, Mohammad Jafari[Supervisor/Supervisors],

Farhad Ashini (2018), "Numerical study of buckling behavior of rectangular orthotropic plate with a rectangular hole using FEM", Msc Thesis, Shahrood University Of Technology, Mohammad Jafari[Supervisor/Supervisors],

Habibollah Pooladi (2018), "Study of stress distribution around regular holes in finite anisotropic plates under in-plane loading", Msc Thesis, Shahrood University Of Technology, Mohammad Jafari[Supervisor/Supervisors],

Mojtaba Safari (2018), "Thermal stress analysis of infinite isotropic plates with noncircular inclusions under uniform heat flux", Msc Thesis, Shahrood University Of Technology, Mohammad Jafari[Supervisor/Supervisors],

Ali Abbasnia (2018), "Presenting an explicit relationship for stress concentration factor of orthotropic plates with different holes using using multiple linear regression", Msc Thesis, Shahrood University Of Technology, Mohammad Jafari[Supervisor/Supervisors], [Advisor/ Advisors]

Ali Keyfari Kheybari (2018), "Non-fourier asymmetric temperature distribution analysis of long orthotropic cylinder according to Cattaneo theory", Msc Thesis, Shahrood University Of Technology, Mohammad Jafari, [Supervisor/Supervisors],

Soheila Yari (2018), " Optimum design of composite plates containing a hole with different shapes under uniform heat flux using GA algotithm", Msc Thesis, Shahrood University Of Technology, Mohammad Jafari[Supervisor/Supervisors],

Sajad Mahdavi (2018), "Optimization of buckling of square composite plates with different cut-outs under thermal loading using genetic algorithm", Msc Thesis, Shahrood University Of Technology, Dr. Alireza Shaterzadeh, Mohammad Jafari[Supervisor/Supervisors],

Hedie Sedighi Kasmaei (2018), "Optimum design of perforated laminated composite plate for maximum buckling load using genetic algorithm", Msc Thesis, Shahrood University Of Technology, Mohammad Jafari, Dr. Alireza Shaterzadeh[Supervisor/Supervisors],

Mohammad Jafari (2017), "Thermal Stress Analysis of Infinite Anisotropic Plates with Different Hole Shapes under Uniform Heat Flux", Msc Thesis, Shahrood University Of Technology, Mohammad Jafari[Supervisor/Supervisors],

Fatemeh Karimi Kenari (2017), "Thermal stress analysis of an infinite plate with non-circular cutouts subjected to a point heat source ", Msc Thesis, Shahrood University Of Technology, Mohammad Jafari[Supervisor/Supervisors],

Majid Rasouli (2016), "Thermal stress analysis of infinite anisotropic plate with elliptical hole under uniform heat flux", Msc Thesis, Shahrood University Of Technology, Mohammad Jafari[Supervisor/Supervisors],

Hasan Mousavian (2016), "Determining optimum parameters to minimize stress concentration around regular holes in symmetric laminates by PSO algorithm", Msc Thesis, Shahrood University Of Technology, Mohammad Jafari[Supervisor/Supervisors],

Mohammad Hossein Bayati Chaleshtari (2016), "Optimized Design for Finite Isotropic Plates with Regular Cutout by Optimization Algorithms", Msc Thesis, Shahrood University Of Technology, Mohammad Jafari[Supervisor/Supervisors],

Reza Gholami (2016), "Numerical analysis of low velocity impact on laminated composite plates", Msc Thesis, Shahrood University Of Technology, Mohammad Jafari[Supervisor/Supervisors],

Hamid Abdolalian (2016), "Analysis of the resultant stress around elliptical cutouts in unlimited functionally graded plates ", Msc Thesis, Shahrood University Of Technology, Mohammad Jafari[Supervisor/Supervisors],

Farzaneh Sadat Mousavi Tabar (2016), "Stress analysis of functionally graded plate with circular hole subjected to mechanical load using separation variable method", Msc Thesis, Shahrood University Of Technology, Mehdi Ghannad, Mohammad Jafari[Supervisor/Supervisors], Amin Ameri[Advisor/ Advisors]

Iman Ghandi Varnosefaderani (2015), "Stress analysis of isotropic plates with two different shaped cutouts under uniform stress in infinite", Msc Thesis, Shahrood University Of Technology, Mohammad Jafari[Supervisor/Supervisors],

Seyed Nasser (2015), "Multiscale Modeling of Nonlinear Behavior of Carbon Nanotube-Reinforced Polymer Composites Subjected to Different Types of Loading", Msc Thesis, Shahrood University Of Technology, Mohammad Jafari, Seyed Hadi Ghaderi[Supervisor/Supervisors],

Seyed Ahmad Mahmodzade Hoseyni (2015), "Optimization of infinite isotropic and anisotropic plates with regular cutout by PSO algorithm", Msc Thesis, Shahrood University Of Technology, Mohammad Jafari[Supervisor/Supervisors],

Abbas Rahimi Petroudi (2014), "Study of effect of material and shaped cut out on stress distribution of perforated isotropic and anisotropic plates subjected to shear load by analytical method", Msc Thesis, Shahrood University Of Technology, Mohammad Jafari[Supervisor/Supervisors],

Behzad Moshiri Aval (2014), "Study of stress distribution around non-circular cutouts in symmetric laminates ", Msc Thesis, Shahrood University Of Technology, Mohammad Jafari[Supervisor/Supervisors],

Hasaan Sadat Ashoori Savadkoohi (2014), "Study of the stress distribution around non-circular cutouts in unsymmetric laminate plates", Msc Thesis, Shahrood University Of Technology, Mohammad Jafari[Supervisor/Supervisors],

Amir Taherinasab (2014), "Thermal stress analysis of an infinite plate with noncircular cutouts subjected to a uniform heat flow", Msc Thesis, Shahrood University Of Technology, Mohammad Jafari, [Supervisor/Supervisors],

Elahe Ardalani (2014), "Study of the stress distribution around regular holes in finite isotropic plate under in plan loading", Msc Thesis, Shahrood University Of Technology, Mohammad Jafari[Supervisor/Supervisors],

Amin Ameri (2014), "Stress analysis of functionally graded Square plate with circular hole subjected to inplane loads", Msc Thesis, Shahrood University Of Technology, Mehdi Ghannad, Mohammad Jafari[Supervisor/Supervisors],

Majid Sheybani (2014), " The analysis of stress and moment distributions around holes in symmetric laminates under tension and bending loading", Msc Thesis, Shahrood University Of Technology, , Hamidreza Eipakchi[Supervisor/Supervisors], Mohammad Jafari[Advisor/ Advisors]

Mohammadreza Hokmabadi (2014), " Thermoelastic analysis of orthoteropic rotating thick-walled cylinder using plane elasticity theory", Msc Thesis, Shahrood University Of Technology, Mehdi Ghannad, Mohammad Jafari[Supervisor/Supervisors],

Mojtaba Hajimohammadi (2013), "Calculation of dynamic fracture parameters in Orthotropic materials under thermal loading by Extended finite element method (XFEM) ", Msc Thesis, Shahrood University Of Technology, Mohammad Jafari[Supervisor/Supervisors], [Advisor/ Advisors]