Shahrood University Of Technology Thesis
Shahrood University of Technology
-
-
- Product Scheduling For Morvarid Iron Ore Mines In Zanjan
- Redesigning of high rate thickener for optimization of wastewater dewatering in Golgohar iron ore complex
- ِDeriving Lead and Zinc prospectivity map in 1:100000 Damghan sheet
- A core flooding lab experimental study to investigate the effect of natural fracture orientation on enhanced recovery by injecting brine in carbonate reservoirs
- A geothermal model for Sabalan area using magnetotelluric (MT) data
- Acquisition, processing and interpretation of EM34 and resistivity data on a water qanat in Mojen area and Comparison of the results
- Acquisition, processing and interpretation of IP and Resistivity data for recognition mineralization of copper in Khezrabad areal - Yazd
- Application of Gray Level Co-occurrence Matrix baxsed textural attributes in reflection seismic data interpretation
- Application of Sobel seismic attribute in reflection seismic interpretation
- Assessment of interaction between line 1 twin tunnels and line 2 tunnel of Tabriz subway using numerical modeling
- Classification Of Facies Using Artificial Intelligent Technique
- Depth estimation using the generalized power spectrum of potential field data–case study: one of the Iranian oil field
- Design and Development of Comprehensive Blasting Manager Software For Open Pit Mines
- Design of Tunnel Drilling and Blasting Pattern In Jointed Rock-Mass
- Detected mud volcanoes with using of joint interpretation gravity and seismic method
- Detecting Lithological Boundaries and Contaminated zones Adopting Wavelet baxsed Image Processing Approach: Case Study, Alborz Sharghi, northeast Iran
- Determination of Equivalent Permeability Tensor of Jointed Rock mass using three dimensional DEM and DFN model Case study: Parsian Earth fill Dam
- Determination of strike, depth and failure zones for HajiAbad aqueduct (Qanat) in Damghan using microgravity
- Determination of uncertainty quantity of petrophysical parameters estimation using Monte Carlo analysis (A case study of a hydrocarbon reservoir in south of Iran)
- Development of models in order to assess global and local stability in room and pillar coal mines
- Developping Zonality Methods by using multi-fractal modeling formextalresource exploration (case study chromite deposits, SE of Iran)
- Dip and geometry estimation of subsurface geological laxyers around wells By vertical seismic profiling (VSP) data Processing
- Effect of Geomechanical Reservoir Properties on Drilling Rate of Penetration- A case study: One of PEDEC’s Oil Fields
- Enhancement of upscaling method of petrophysical logs in Hampson-Russell software by using Wavelet, Case study: An Oil Field in South of Iran
- Enhancing migrated seismic section quality and decrease sensibility to velocity model by processing with model baxsed CDS stack methods
- Estimation of geomechanical parameters for wellbore stability using well and reflection seismic data
- Estimation of Rock Mass Strength with Non-Persistence Joints using 3-D Stochastic Discrete Fractures Network (DFN)(Case Study: Rudbar Lorestan Dam & Hydropower Plant)
- Estimation of Stability index of subway tunnels during operation using rock engineering systems ( RES)
- Evaluation of applying tank leaching operation on fine tailings of Chahmoosa copper mine
- Evaluation of excavation effect of Tehran Subway Line 7 on Abuzar Tunnel stability in intersection of them using numerical methods
- Evaluation of quality and integrity of concrete structures using “impulse response” non-destructive method – case study: the bridges of a part of Denmark’s railway network
- Evaluation of reliability in open mine production systems Case study: Siriz iron ore mine
- Evaluation of Shale Gas Potential in Garau and Sargelu Formations baxsed on Organic Geochemical Data from Surface Sections in Lorestan Region
- Exploration of Band-Gheichi copper deposite in the Torood region by resistivity and induced polarization methods
- Gaussian beam migration (GBM) via ray tracing of complex ray in depth domain
- Groundwater exploration by modeling and interpretation of resistivity data and obtaining water potential maps by integration of available information using fuzzy logic method in GIS (case study of Damghan plain)
- Groundwater table monitoring using microgravity data and subsidence rate of near water well by means of differential SAR interferometery technique in Bastam area.
- Hydraulic fracture design in one of the Petroleum Engineering & Development Company wells
- Hydrocarbon Source Rocks evaluation using Neuro-Fuzzy by integrating well log, geochemical and seismic data
- Hydrogeochemistry and environmental assessment of groundwater in the Khomein plain
- Identification of carbonate laxyers with reservoir quality using intelligent model and Dunham classification
- Identification of geothermal resource prosperous area by estimating of Curie point depth (CPD) and heat flow data in Ardebil province
- Improvement of source parameters estimation techniques of potential filed anomalies
- Integration and interpretation of resistivity and refraction seismic surveys for recognition of subsurface structures in Chooman dam site (Kurdistan Province)
- Introducing the Optimal Blending plan of Varions Coal Marks Nargeschal
- Investigation in Reaching the Best Gas Resistant Drilling Cement Slurry Formulation
- Investigation of Acidizing Operation In Hydrocarbon Reservoirs Using Artificial Neural Network
- Investigation of the Effect of Bentonite on Rheological Properties of the Polymer Fluid, and on the Reduction of Permeability into the Carbonate Core
- Investigation on imaging by hyperbolic and parabolic equations in common reflection surface and common diffraction surface stack methods
- Lubricity Performance improvement of (heavy and polymer) water baxse drilling fluid and investigating its effect on rheology properties
- Making of polymeric drilling fluid and its effect on stabilizing the shale and rheological properties of drilling fluid
- Mix design for two-component grout in water bearing urban areas mechanized tunnelling (TBM) - Case study Tehran metro line 7 east- west tunnel
- Modeling and integration of exploration data in GIS environment to prepare of mineral potential mapping of iron in Bastam 1:100000 sheet
- Modeling and interpretation of induced polarization and resistivity data for exploration of copper ore deposits in Haftkooh area, Shahrbabak
- Modeling and interpretation of resistivity and induced polarization data for exploration of poly-mextallic ore deposits in Kaboodan area
- New target identification by producing structural closure map of reservoir horizons in one of the oil filed in SW Iran.
- Optimization of the grade and recovery of molybdenum in the Copper-Molybdenum flotation circuit (Case study: Sungun copper complex)
- Optimization of the parameters affecting the heap leaching of Mahdi Abad mine's oxidized lead and zinc ore
- Optimum orientation of horizontal wellbore drilling baxsed on 3D geomechanical model - A case study: one of the NISOC’s oil field
- Processing and jointing seismic and gravity data by Normalized Full Gradient method for improving seismic interpretation
- Processing, modeling and interpretation of GPR data in order to determine depth, thickness and lateral limits of glaciers in AlamKooh area, Mazandaran
- Processing, modeling and interpretation of magnetotelluric (MT) data for exploration of geothermal resources within Bushli area in Aredebil province
- Proposing the optimum design for silica reduction of Chadormalu iron concentrate
- Prospecting and exploration of gold deposits in Darreh-Ashki area by modeling and interpretation of IP and resistivity data
- Provide a two echelon chain model for supplier – producer in Steel Industry (Case study: Esfahan Steel Company)
- Quantitative Evaluation Of Permeability Using Acoustic Waves And Determination Of Cementation Factor In A Carbonate Reservoirs In Southern Iran
- Resolve problems seismic imaging of complex structures by reverse time migration (RTM) method , A case study in a west of Iran
- Risk analysis of pit limit to grade variation by geostatistical simulation method, Case study: SADAT-e- SIRIZ Iron Ore Mine
- Risk and sensitivity analysis in final pit limit with regard to price and cost, Case study: Takht Gonbad Sirjan copper mine
- Rock mechanical modeling for one of the Iranian north wells
- Sodium and potassium carbonate Production from liquors obtained from nephline syenite leaching process (Case Study: Alumina production plant from Sarab nepheline syenite)
- Stability analysis and support design of Bakhtiary dam crest access spiral tunnel
- Static and Dynamic Rock Slopes Stability Analysis of Upper Reservoir Rudbar Pumped-Storage Hydroelectricity Power Plant
- Sterategic planning for explosives industry ofIran using SWOT analysis (industrial explosive)
- Strategic planning for the Aluminum industry of Iran using SWOT analysis
- Technical evaluation hydraulic fracturing in a number of wells in one oil field to increase production rate
- The new method for speciation and zonation of pollution risk due to toxic elements by GIS Case study: Sarcheshmeh porphyry copper mine
- the possibility of hydromextallurgical extraction of nickel from low grad reserves
- Thermo-Mechanical Modeling of Panels Dimensions in Underground Coal Gasification Method
- Time – Time transform and its application to seismic data filtering
- Using image analysis method to evaluation quantitative parameters of hematite ore. (case study: Diyan Cu-Fe mine, Semnan province)
