Shahrood University Of Technology Thesis
Shahrood University of Technology
- Geophysical prospeting of copper deposite using airborne magnetometry, induced polarization and Resistivity in Torud, Semnan province/Iran.
- Influence of longitudinal joints pattern between segments and mechanical properties of back fill grouting on tunnel lining by numerical method-case study:Tabriz metro line 2
- Sequence stratigraphy analysis and reservoir quality evaluation by petroghysics logs in one of the fields in south of Iran
- 3-D modeling of magnetic data due to Sirjan iron deposit by using inversion of Magnetic Data
- 3D structural model building and interpretation by seismic multi-attributes combination in 3D seismic data in one of the oil field in SW Iran
- Appliation of Empirical Wavelet Transform in Reflection Seismic data Interpretation
- Application of generalized cross validation Regularization for smooth modeling of magnetic data, case study: MT. Milligan_ Canada
- Application Of Remote Sensing And Geochemical In Order To Gold Exploration In NE Of Zarshoran
- Application of Shearlet transform for random noise suppression in reflection seismic data
- Application of Wavelet transform and Enhanced Horizontal Derivative (EHD) to Interpretation Gravity Anomalies
- Appplication Of Tikhonov Method For Nonlinear Inverse Modeling potential field Data Case Study Acquired In North-West Iran (Aslanduz)
- Assessing and Managing safety risks using fazzy multi criteria decision making methods (case study: chromite Faryab mines)
- Bauxite prospecting in eastern Alborz using remote sensing and GIS
- Buried channel identification in Abadan plain using multi attributes analysis in 3D seismic reflection data
- Coal exploration using ground penetrating radar (GPR) in educational mine paradise - Shahrood University of technology
- Design and stabilization of rock slop with discontinuity, case study Tehran-Shomal freeway first part
- Determination of Roughness Using Statistical Modeling of Rock Joint Geometry
- Determination of shape and depth of magnetic anomalies using enhanced normalized full gradient method (case study: Shadan area)
- Determination of the boundary between fresh and salty water on the shores of the Caspian sea using electrical resistivity method (A case study: Neka area)
- Determine the suitable weighing interval in longwall mining using numerical modeling (Case study: Tabas parvadeh coal mine)
- Developing a new index for rock mass fragmentation due to blasting in open pit mining using fuzzy rock engineering system Case study: Sungun copper mine
- Effect of Grade Ratio of Sulfide-Oxide Minerals in Flotation Process on Separation Function (Case Study of Nasim Bardsan Copper Mine)
- Estimation of advance rate of TBM using probabilistic methods -Case study: Lar-Kalan water conveyance tunnel lot-2
- Estimation of Static and Dynamic Petrophysical Properties of Carbonate Reservoir Rocks Using Thin Section Image Analysis and Simulation of Fluid Flow in Porous Media
- Estimation of water table changes and Mass changes coused by geodynamic effects using gravity satellite data (GRACE)
- Experimental investigation of surfactant flooding as aspect of soaking time on wettability alteration and reduction of interfacial tension (IFT) on the recovery of the carbonate reservoir rocks of South West Iran
- Exploration new polymextal deposits in the geological sheets 1:100000 Moaleman and Kalate Reshm
- Exploration of mextal reserves in the Sankhast area on a local scale using geochemical and remote sensing methods
- Exploration of Silica mineralization using GPR and resistivity geophysical methods in south Toroud area, Shahrood region
- Extending the model for evaluation of performance of chain saw machine in decorative stone mines
- Geothermal exploration in north-west of Iran (Sabalan-Sarab) field using Gravity and Magnetic data Interpretation
- grouting capability in jointed rock mass
- High Resolution Aeromagnetic Data Processing And Interpretation, A Case Study: Suhar Area, Oman
- Hybrid modeling of faults and fractures using seismic attributes and FMI log in one of the oil fields of the Persian Gulf
- Identification, ranking and evaluation of factors affecting safety in tunneling, Case Study: Tehran-Shomal Freeway-Lot1
- Improvement in Direct Sampling Multiple-Point Simulation baxsed on Hybrid Wavelet-Data fusion
- Investigating the effect of Intrinsic Factors on coal spontaneous combustion (Case Study: Alborz markazi Coal Mines)
- Investigating the Influence of Mechanochemical Sulfidization on Oxide Copper Recovery by Flotation Method Case Study: Abbas Abad Copper Mine
- Investigating the potential of using alternative oxidants in refractory gold recovery by considering the process mechanism, case study Zar –Shooran Gold Mine
- Investigation of joint and fractures using GPR method in a decoration stone mine: case study; Astaneh mine
- Investigation Of Secondary Lithogeochemical Holos In Order To Determine Geochemical Anomalies, Case Study: North East Of Miami- State Semnan
- Investigation of the inorganic salts on flotation recovery improvement and decreasing reagents
- Investigation on the Silica Mineralization at Chah- Andu area, South Damqan with Special Emphasis on Gemology
- Investigation penetration rate tunnel boring machin(TBM) for kanisib project
- Lead & Zinc exploration by using Resistivity and Inducted polarization methods in Takht – pey area, Tash, Shahrood
- Magnetic data processing and interpretation using Euler, analytical signal and the NFG methods and comparison the results Case Study: Tange-e-Hanar area, south of Birjand
- Mapping Potential area and Uncertainty Estimation Using Integration of Dempster-Shafer Data-driven and Knowledge-driven Methods
- mextal biological extraction by sin-genetic bacteria available in the mining soil with emphasis on the governing mechanism
- Mineral potential mapping of Mn deposits using GIS and Remote sensing method in Rashm 1:100000 sheet
- Mineralo-Geochemical studies on Goshfil lead and zinc ores, from mineral processing and exploration point of view
- Mineralogy of Clay Minerals from Petrophysical Data
- Modeling and interpretation of induced polarization and resistivity data for exploration of copper ore deposits in Saveh, Markazi Province
- Modeling of chromite deposits in regional and local scales using continuously-weighted evidences into neural network
- Numerical modeling of oil well integrity with special attention to cement mechanical properties of one oil well in one Iran’s southwestern field
- Numerical Modelling of Stress Effect on Fluid Flow in Fractured Rock-mass Using Krylov Iterative Solution Methods
- Optimization of Blasting Characterization baxsed on the Rock Fragmentation Theory to Obtain Better Fragmentation in Jajarm Limestone Mine
- Optimization of rock fragmantaion to reduce blasting costs in open pit mines (case study: Bauxite Jajarm
- Optimizing the parameters affecting the alkaline oxidation of Zarshuran gold refractory ore
- Prediction of flyrock due to explosive operation using adaptive network-baxsed fuzzy inference system and Support Vector Machine and compare them together (Case Study: Anguran mine)
- Preparation of the Membrane of Porous Kaolinite Combined with Lanthanum and its Application for the Purification of Industrial Wastewater
- presentation a experimental model for prediction of energy consumption machine gang saw in carbonate rocks
- Presentation of a Model for Determination of dilution in Cut and Fill Mining Method
- Presentation of a qualitative and quantitative model to evaluate cavability of roof strata in mechanized longwall coal mining
- prioritizing rescue of personnel in case of an emergency in underground mines
- Processing and modelling of airborne electromagnetic data Fault North West River High Shandaqh Bala
- Provide an appropriate mixing plan for hydraulic concrete filler to fill underground uranium mines
- Provide an experimental model for estimating the wear of cutting tools for chain saws machine (case study: kouh sefid fenjan bowanat quarrie(
- Ranking of the risks in mechanized tunnelling of large cross section tunnels in hard rocks (Case study: Western Alborz Tunnel)
- Recognition of the composition, texture and internal fractures of Khaju Bridge using GPR method
- Recovery of copper from sulphate leaching solution using solvent extraction, investigating the effect of synergism and antagonism between extractants
- Redesigning under ground Coal Mine ventilation system and fire simulating to predict the necessary safety measures using the ventsim software (Case Study: Lower Malach Aram Mine)
- Representation of mineral predictive maps using fuzzy spatial multi criteria decision making methods and uncertainty modelling, case study: Bavanat massive sulfide prospects
- Roadway’s blast-induced ground vibration effects on roof stability and caving step in longwall coal mining
- Seismic stratigraphy modeling of the western Abadan plain using 3D reflection seismic data
- Selection and Analysis of an Appropriate Method for Ventilation of Alavi Tunnel, Bandar Abbas with Technical-Economic Approach
- Selection of suitable mining method for Dopplan Boxite mine Analytical Hierarchical Process (AHP)
- Stability analysis of face on mechanized long wall mining method with numerical modelling, case study: Tabas coal mine Mohammad Mehdi Kabaerian Esfahani
- Study of underground metro station excavation methods and choosing the suitable method considering technical and costs item (case study line 6 of metro of Tehran)
- Survey belasting results with Air deck method in iron mines
- The effect of grouted rock bolt on strength parameters of jointed rock mass in tunnels
- The Estimation of Curie Point Depth Isotherm by Using Spectral Analysis of Aeromagnetic Data to Explore the Promising Geothermal Resourses in N-W Iran
- The Slope stability Analysis in Shams Abad Iron Mine
- Tunnel Boring Machine Selection in Soft Ground (Case Stady: Tehran Metro-Line 7 (North-South Section))
- Ultimate Pit Limit Determination by Net Peresent Value (NPV) Maximization
- Using TSVMSC algorithm to Improve the Integration of Inversion Results of Refraction Seismic Tomography and Electrical Resistivity Data
- Wellbore Stability Analysis and Determination of Optimized Drilling Orientation in Highly Fractured Reservoirs; A Case Study One Oil Well in South West of Iran
