Shahrood University Of Technology Thesis
Shahrood University of Technology
- Covert attention detection using P300 in EEG signals
- A Functional Electrical Stimulation baxsed Controller for Foot Drop
- A Numerical study for improvement of thermal performance of gas turbine blade internal cooling in multi-pass channel
- A numerical study of various crescent ribs geometry on the way of a fluid flow passing in a square channel in a gas turbine blade to enhance cooling and heat transfer
- Active control of droplet generation in a micro channel
- Active vibration control of truncated conical shell under harmonic excitation using piezoelectric actuator
- An experimental investigation on magnetorheological fluids stability baxsed on Surfactants
- An experimental study on the feasibility of increasing efficiency the wind turbines (with power less than 1000 watts)
- Analysis of Buckling of Functionally Graded Carbon Nanotubes-reinforced Composite Beams in Hygrothermal Environments
- Analysis of equal channel angular pressing of mextallic tube using upper bound method versus finite element method
- Analysis of viscoelastic lubrication for journal bearing using the Giesekus model
- Analytical Solution of Heat Transfer in Heterogeneous Spherical Composite Pressure vessels
- Asymmetric Buckling of Circular Plates Subjected to Radial Load Using First-Order Shear Deformation Theory
- Calculation of the stress intensity coefficients for a crack in an Isotropic limited environment under the influence of Gas
- Computation of stress intensity factors for a cracked orthotropic medium subjected to thermal shock considering Lord-Shulman theory and using extended Finite Element Method
- Computation of Stress Intensity Factors for a ledge crack in fully coupled media subjected to the thermal shock and using eXtended Finite Element Method
- Computation of stress intensity factors in thermoelectric media subjected to the thermal shock considering temperature-dependent properties and using eXtended Finite Element Method
- Creep analysis of thick spherical shells made of functionally graded material under mechanical load and radial gradient temperature baxsed on PET
- Design a new variable impedance actuator for knee joint of rehabilitation exoskeleton
- Design and Control Implementation of Intelligent Exercise Bicycle for Rehabilitation
- Design of an optimal control strategy for trajectory tracking in work space by delta robot
- Determination of stress intensity factors for a crack in diffusion-thermoelasticity generalized problems using eXtended Finite Element Method
- Determination of stress intensity factors in a cracked orthotropic media under thermal shock considering Green-Naghdi theory and using Extended Finite Element Method
- determination the thermodynamic properties of natural gas using each both input properties and gas combination and using GERG-2008 equation of state
- Dynamic analysis of a dielectric elastomer-baxsed hyper-elastic micro-beam resonator, with large vibration amplitude
- Energy and exergy analysis of co-generation system in sugar poduction process in shahrood sugar factory and testing the feasibility of improving technical and economic conditions
- Energy, Exergy, Exergo-economic Analysis and Optimization of the Solar-Biomass System without Thermal Storage
- Exergy analysis and multi-objective optimization of a hybrid system consisting of solid oxide fuel cell, Stirling engine, reserve osmosis desalination
- Experimental and analytical study on clinching of advanced high strength steel sheets
- Experimental investigation of surface groove and temperature on falling velocity of spherical bodies inside water
- Experimental Investigation on Flow Boiling Heat Transfer in Vertical Annulus
- Experimental study of composite beams and plates reinforced with carbon nanotubes under axial compressive force
- Experimental Study of Effects of Different Parameters on the Performance of Electrolyzer Producer of Hydroxy Gas and Evaluation of its on-board injection in the Internal Combustion Engine
- Experimental study of The Effect of Porous Obstacle on Premixed Methane-Air Flame Propagation in a Closed Duct
- Fabrication and characterization of A Flexible Dermal Patch for on Demand Topical Drug Delivery on to the Wound Bed Using Thermoresponsive Microfluidics
- Feasibility study on piercing of mextallic tubes by using elastomeric tools pressure
- Force Prediction from EMG Signals for Impedance Control Implementation
- Fuzzy modeling of droplet generation in a micro channel with two phase flow
- Implementation of a human and machine interface (HMI) using eye and blxink motion
- Improving the Position Control Function of a Palletizer Robot Using High-Sliding Mode Control Technique
- Interaction control of rehabilitation robot with safety consideration at Structure
- Mathematical modeling and control of cancer considering chemotherapy and immunotherapy
- Non-linear elastic analysis of pressurized thick cylinders with variable thickness under loading made of hyperelastic materials using shear deformation theory
- Nonlinear analysis of diffusion limitations on the response and sensitivity of amperometric biosensors
- Nonlinear Vibrations and Stability of Spinning Twisted Beams
- Numerical analysis of flow structure and heat transfer characteristics in a rectangular cooling channel (AR=3:1) in gas turbine blades with V-shaped dimples and protrusions
- Numerical analysis of motion and separation of particles in a microchannel with the presence of a magnetic field
- Numerical Investigation of heat transfer of electroosmotic flow in a curved microchannel
- Numerical Investigation of particle distribution and particle movement in a microchannel in the presence of standing surface acoustic wave
- Numerical simulation of dimple effect on the aerodynamic performance of a wind turbine
- Numerical solution of nanofluid flow inside a wavy channel using the SADI method on GPUs
- Numerical study of effective parameters on a VIV energy extraction system
- Numerical study of particle separation by using electrokinetc in microchannel
- Numerical study of the performance of energy recovery ventilation systems with a new membrane shape coupled with heat and mass transfer
- Numerical study on the arrangement and shape of the ribs to increase the heat transfer in the internal cooling path of the gas turbine blades using LES method
- Optimal Design and Control of the Stewart Parallel Robot Applicable to Flight Simulator
- Optimal Synthesis Of The Compliant Mechanisms With Curved Beam
- Optimization and Modeling and validation of Plate and Spiral Tube Water Cooled Photovoltaic/Thermal (PV/T) System
- Optimization of stress distribution around regular holes in finite Composite plates under in-plane loading using GA
- Performance evalution of Combined Cooling, Heating and Power (CCHP) system baxsed on the combination of gas engine and stirling engine as prime mover
- position control of a three phase induction motor , by using high order sliding mode technic
- Primary Resonance Analysis of FG Cylindrical Shells Subjected to External Excitations
- Secondary resonance analysis of grid stiffened conical shells subjected to external excitations
- Simulation of flow inside MR damper by using dissipative particle dynamics method
- Simulation of immiscible fluid LOD microfluidics using Lattice Boltzmann Method
- Snap-through buckling of a shallow arch with general boundary conditions
- Study Of Stress Distribution around Quasi-Square Hole in Infinite Orthotropic-Viscoleastic Plate Under Axial loading
- Study the effect of adding different nanoparticles to Diesel fuel on flame combustion characteristics
- Technical - economic and environmental analysis of CCHP systems with waste incineration power plant as prime mover
- Technical and economic feasibility of using natural gas in locomotives
- Technical and economic review of the production of liquid natural gas (LNG) on a small scale
- Technical, economical evaluation of combined cooling, heating and power (CCHP) system with internal combustion engine in industrial cold storages
- The effects of local and global potentials of nonlinear energy sinks on vibration mitigation of the system
- Thermodynamic analysis and technical and economic optimization of combined cooling, heating and power system with steam turbine as prime mover
- Thermodynamic and Economic Analysis of Combined Cooling, Heating and Power (CCHP) system baxsed on a Molten Carbonate Fuel Cell (MCFC)
- Vibration analysis of Hyperelastic Fluid-Conveying Microtubes
