Shahrood University Of Technology Thesis
Shahrood University of Technology
-
- A numerical investigation on instability of viscoelastic fluid flows around a sphere
- Design a higher order sliding mode control for a Delta parallel robot
- Design and fabrication of ceramic dental implant using Selective Laser Sintering (SLS) method
- Elastic analysis of pressurized FGM thick spherical shells using nonlinear plane elasticity theory
- Experimental investigation of the effect of composite patches containing nanoparticles on bending and buckling behavior of thin walled tubes with circular cutout
- Increasing the performance of nonlinear energy sink (NES) of a single degree of freedom system by suggesting a new mechanism in the absorber
- Investigating the effect of vacuum pressure parameters, filling ratio and length ratio of evaporator and condenser on the performance of pulsating heat pipe using experimental method
- Knee Brace Design baxsed on the Novel Knee Model and Dynamic Stability during Human Walking
- Laboratory study of the collision of non-Newtonian fluid droplets containing spiral micelles with a solid surface
- Low velocity impact analysis of functionally graded porous circular plate reinforced by graphene
- Optimal estimation of capacity and location of wind turbines in stand-alone Systems baxsed on battery/hydrogen energy storage
- Practical evaluation of the vertical axis wind turbine for use in the compression refrigeration cycle
- Provide a new method to improve the performance of the pulse echo method in fault diagnosis
- Thechnical and economic evaluation of fuel production process from algae by anaerobic methods and its potential measurement in Iran
- Thermodynamic modeling and experimental study of crystallizers for Potassium extraction from wastewater
- Thermomechanical Buckling analysis of porous FG sandwich plate with cut-out under nonuniform edge loading
- Vibrations control of a nanopipe conveying fluid using a piezoelectric actuator
- A study of formation mechanism and control methods particulate matter (PM) in the combustion process of internal combustion engines
- Analysis and modeling of delamination in laminated composite beams with curved fibers
- Analytical and experimental investigation of locating error of a polyhedral workpiece in the fixture
- Crack Propagation Analysis in 2D Orthotropic Medium Under Thermal Shock Using XFEM
- Development of the optimal model of using solar energy in Combined desalination plants from the perspective of 4E analysis
- Exergoeconomic analysis and multi objective optimization of multi-generation system baxsed on solar energy for generate electricity, cooling and hydrogen using different optimization algorithms
- Experimental investigation of flame characteristics (thermal behavior and radiation) pollutant emissions of diesel, biodiesel and ethanol
- Experimental investigation of heat transfer in a constant and variable (nonuniform) magnetic field in a channel
- Experimental investigation of the effect of water absorption on the adhesion between phenolic resin containing nanoparticles and fibers with the help of tensile and bending tests
- Experimental investigation on improving the performance of thermoelectric generator system in transient boundary conditions using phase change materials and mextal foams
- Experimental Investigation on the Effect of 206 Engine Mounting Parameters on Dynamic Stiffness
- Experimental study of settling of spherical solid particles in Newtonian fluid considering thermal effects
- Failure analysis of hot forging die used for production of female hinge of Peugeot 206 Car door
- Investigating drawability characteristics and mechanical properties of mextallic sheets processed by accumulative roll bonding
- Keywords: Health monitoring, Higher harmonic, Slider-crank mechanism, Joint clearance, Fast fourier transform, Filter
- Microstructural study of magnetorheological fluids by DEM-CFD Simulation in Shear flow
- Modeling and Dynamic Analysis of a Fish Robot with the Soft Actuation
- Modeling and optimization of a combined grid-connected CCHP-PVT system for a hotel in Mashhad
- Modeling and optimization of variables affecting the mechanical and electrical properties of the dissimilar joint of aluminum-copper wires produced from the ultrasonic welding
- Non-linear vibration and resonance analysis of stiffened FGM truncated conical shells subjected to harmonic transverse excitation
- Numerical study of air ventilation in a saloon train cabin to reduce the risk of COVID 19 spread
- Numerical investigation and validation of the generation of induced vortices on floating electrodes in order to separate particles inside a microchip
- Numerical investigation of particle separation within a microchannel using a magnetic field induced by electric current wires
- optimum trajectory planning of a cable parallel robot baxsed on performance indices
- Proposing the multi-objective optimization algorithm MOEO for mixed chemo-immunotherapy of cancer
- Techno-economic and environmental evaluation of the Multi-generation system to produce power and fresh water with wasteheat recovery in Iron and Steel plant
- The effect of adding nanoparticles on the tensile strength and critical buckling load of glass/epoxy composite beams under sunlight irradiation: An experimental study
- Thermodynamic analysis of HDH desalination by internal heat Recovery
- Traffic flow prediction using time series
- Transient heat transfer from a falling solid sphere at low Reynolds numbers
- Unsteady thermodynamic modeling of desalination, combined reverse osmosis and photovoltaics, in the presence of disturbances and uncertainties
