Shahrood University Of Technology Thesis
Shahrood University of Technology
- Feasibility Study of Using Fuel Cell in Natural Gas Pressure Drop Station
- Investigation of stability of lean premixed flames on a stratified burner by Lattice-Boltzmann method
- Technical and economical evaluation of gas condensates production from gases that sending to flare with cooling process
- A numerical study on hemodynamic parameters of atherosclerosis using the fluid-structure interaction
- An experimental investigation on viscous fingering instability of Newtonian and Non-Newtonian fluids in transparent porous media with compact structure consisting of glass beads
- Analytical and Numerical Buckling Analysis of Homogeneous and Isotropic Rectangular Plates with Circular and Square Cutouts
- Analytical Solution for Buckling of Homogeneous and Isotropic Cylindrical Shells with Variable Thickness by Considering Initial Imperfection
- Collision Free Trajectory Planning for A Tensegrity Mechanism
- Design and Construction of Online Oil Condition Monitoring Laboratory Sensor for Spark Ignition Engine Using Dielectric Constant Measurement Method
- Design and control of flying robot for inspecting high-voltage lines by image processing
- Design and manufacturing a typical domestic natural gas meter baxsed on capillary Tube Thermal mass flow mete
- Design and Modeling of a Combined Cooling, heating and Power (CCHP) system with energy storage, for Mechanical and Construction Engineering Department of Shahrood University of Technology , Campus 2
- Design, fabrication and implementation of micro-slurry jet erosion test device for evaluation of the erosion properties of hard thin coatings
- Designing a method for continuous measurement of blood pressure baxsed on electrocardiogram and pulse oxime signals
- Determination of mode I stress intensity factor in a thermoelectric cracked plate and cylinder under thermal shock using weight function method
- Determination of stress intensity factors in a 2D finite cracked isotropic media under thermal shock considering Green-Lindsay theory and using extended finite element method
- Developed Actuator Line modeling of Horizontal Axis Wind Turbine under Redial Flow
- Development of correlations to calculate the Nusselt number and friction factor under laminar flow condition for Nanofluids in a microtube
- Dynamic Modeling, Trajectory Planning and Robust Control for the European Robotic Arm
- Effect of Thread Manufacturing Parameters on Friction Coefficient and Fatigue Life in Cylinder Head and Journal Bearing Bolts of Marine Diesel Engine
- Examination the analytical and technical and economical using linear parabolic collectors for domestic hot water supply hybrid with natural gas
- Experimental Analysis of the Effect of Wavy Airfoil on the Aerodynamic Characteristics of Specific Airfoil
- Experimental and numerical study on equal channel angular pressing of bimextallic tube
- Experimental study of Newtonian and non-Newtonian droplet collision on inclined solid surface
- Free Vibration Analysis of Heterojunction Carbon Nanotubes Using Molecular Dynamics Simulation
- General Elastic Solution of Pressurized Thick Cylinders with Large Deformation Using Nonlinear Plane Elasticity Theory
- Heat transfer optimization of nanofluid in a wavy channel using particle swarm optimization algorithm
- Improvement of the VSA structure baxsed on changing the fixation points of elastic elements by modifying of mechanism in a rehabilitation robot
- Investigatin of Aeroacoustic phenomenon around the helicopter blade in an unsteady two-Dimentional state
- Investigating control algorithm of a Commercial heating and cooling system to achieve economical optimal point
- Investigating the turbine rule in primary design of the electric energy production from ORC cycle
- Investigation of dynamic and vibrational behavior of mechanical parts of MEMS made of nonlinear elastic materials using hyperelastic models
- Investigation of mechanical properties of a titanium implant processed by equal channel angular pressing
- Investigation of the effect of die manufacturing operation on the forging process tribology
- Investigation on Falling Ferrofluid Droplet and Rising Bubble in Magnetic Fields Using Lattice Boltzmann Method
- Modeling and Desining of Combined Closed Air HD Desalination System and DG Engine
- Modeling and Feasibility of using hybrid Solar Absorption Refrigeration System in cold stores according to Irans climatic conditions
- Modeling and performance improvement of combined cooling, heating and power (CCHP) system driven by Stirling engine
- Nonlinear thermo-mechanical buckling analysis of eccentrically stiffened thin FG cylindrical panel on elastic foundations
- Nonlinear vibration of axially moving beam with multi nonlinear energy sinks
- Nonlinear vibrational analysis of an AFM in tapping and contact mode with FGM conventional cantilever, using nonlocal elasticity theories
- Numerical and experimental study on sheet mextal hole-flanging using incremental forming technique
- Numerical investigation of two phase flow in microchannel
- Numerical investigation of viscous fingering instability in immiscible viscoelastic fluid
- Numerical Investigation on Two-Phase Flow in the Gas Diffusion laxyer of a Polymer Electrolyte Fuel Cell
- Numerical Modeling of electric vacuum furnace
- Numerical modeling of heat transfer and magnetic fields in vacuum induction furnace
- Numerical Modeling of Particle Effects in internal flow on corrosion
- Numerical Simulation of Fingering Instability for Viscoelastic Fluids Used in Enhanced-Oil-Recovery Operations
- Numerical simulation of Supercavitation flow over a disk-shape cavitator with eccentric holes
- numerical simulation of the discharge process natural gas during purging
- Numerical simulation of the electroosmotic flow of the Carreau-Yasuda model in the rectangular microchannel
- Optimization of Process Variables in Forming of Tube Fittings by Using Elastomer Tool
- Pool boiling enhancement by using nanofluids
- Power-law preconditioning method to improve the convergence of the numerical simulation of active flow control of unsteady flows on Airfoils
- Primary design of the heat exchanger in organic Rankine cycle (ORC) for improve the electricity production from waste heat
- Simulation and Aerodynamic Performance Analysis of Flow around Wind Turbine Blades with Surface Air Injection
- Simulation of pulsatile blood flow through curved stenosed arteres
- Study on mextal tube forming through combined low and high pressure hydroforming
- Study the desirability of using gas engine heat pumps (GEHP) in different climates of Iran, and Assessment of alternative methods
- Technical – Economic analysis of Combined Cooling, Heating, and Power, (CCHP) baxsed on hybrid microturbine Prime mover (solar- gaseous) For a residential building
- The effect of Local Potential and Damper on the Energy Ttransfer between Two Coupled Oscillators
- Thermal stress analysis of an infinite plate with non-circular cutouts subjected to a point heat source
- Thermal Stress Analysis of Infinite Anisotropic Plates with Different Hole Shapes under Uniform Heat Flux
- Thermal viscous fingering in porous media
- Thermodynamic Simulation of Multi-stage Natural Gas Reciprocating Compressors
- Three Dimensional Numerical Investigation of the Effect of Wavy Wing with Specific Section on Aerodynamic Characteristics
- Vibration Analysis of a Cantilever Microbeam Attached to a Magnetorheological Elastomer laxyer at Free End Under Shear And Squeez Mode
- Vibrations analysis of an asymmetric circular viscoelastic plate using first order shear deformation theory
