TK1106 : Design and simulation of a broadband inductorless low-noise amplifier with low power Consumption
Thesis > Central Library of Shahrood University > Electrical Engineering > MSc > 2026
Authors:
[Author], Mohammadreza Ashraf[Supervisor]
Abstarct: In receivers, one of the most important components is the Low Noise Amplifier (LNA), since the input signal is initially very weak and needs to be amplified without adding significant noise. One of the major applications of such amplifiers is in mobile phones, which operate with a limited power supply (battery). In this context, both noise performance and power consumption are critical parameters. On the other hand, circuit parameters often involve trade-offs—improving one may lead to the degradation of another. Therefore, in this project, to reduce both the noise figure of the amplifier and its power consumption, techniques such as main transistor noise cancellation, current reuse, and transconductance boosting have been employed. While many LNAs utilize inductors, which occupy significant chip area, this design avoids the use of inductors entirely. The proposed LNA achieves a minimum noise figure of 2.1 dB, a power gain of 19.54 dB, with a supply voltage of 1.8 V and a power consumption of 8.1 mW, operating over the frequency range of 200 MHz to 1.4 GHz, implemented in TSMC 180 nm CMOS technology.
Keywords:
#Keywords: Noise #amplifier #transconductance #gain #impedance Keeping place: Central Library of Shahrood University
Visitor: