TK1104 : Design and Implementation of a High-Gain Microstrip Array Antenna
Thesis > Central Library of Shahrood University > Electrical Engineering > MSc > 2026
Authors:
Abstarct:
Abstract
Microstrip antennas have been widely used in communication, radar, and satellite systems due to their features such as low weight, compact size, low fabrication cost, and ease of integration with microwave circuits. Despite these advantages, low gain is considered one of the most important limitations of this type of antenna.
In this research, the design, optimization, and implementation of a 32-element microstrip antenna array with a 4×8 configuration operating in the X-band at a center frequency of 9 GHz are presented. In the proposed structure, a Rogers RO4003C substrate with a thickness of 0.8 mm is used, and the array is fed through a coaxial input baxsed on an SMA connector along with a microstrip feeding network.
The design process was carried out with the aim of achieving high gain, proper impedance matching, and improved radiation performance. Various parameters of the structure, including element dimensions, inter-element spacing, and the feeding network, were optimized. Simulation results show that the proposed antenna exhibits a return loss better than −10 dB at the center frequency of 9 GHz and achieves a gain of approximately 22 dBi. In addition, the impedance bandwidth baxsed on the S11 < −10 dB criterion is about 100 MHz.Measurement results also show good agreement with simulation results, confirming the validity of the proposed design.
Keywords:
#Keywords : Microstrip antenna #antenna array #X-band #high gain #microstrip feeding network #Rogers RO4003C #9 GHz Keeping place: Central Library of Shahrood University
Visitor:
Visitor: