TA882 : Experimental Evaluation of Seismic Behavior of Reinforced Concrete Beam-Column Connections with 20-Degree In-Plane Column Inclination under Cyclic Loading
Thesis > Central Library of Shahrood University > Civil & Architectural Engineering > MSc > 2026
Authors:
Abstarct: Abstract
Reinforced concrete (RC) beam-column joints are among the critical regions of moment-resisting frxames subjected to seismic loading, and their performance plays an important role in ensuring the strength and ductility of structures. The presence of in-plane column inclination can affect the seismic behavior of beam-column joints by altering the force-transfer path, stress distribution, and shear demand within the joint region. Despite the availability of design provisions for conventional beam-column joints, the behavior of joints with inclined columns still requires further experimental investigation.
In this study, the seismic behavior of three 1:2-scale reinforced concrete beam-column joints was experimentally investigated under quasi-static cyclic loading. The specimens consisted of a beam-column joint with a vertical column and seismic reinforcement detailing, a joint with a vertical column and non-seismic reinforcement detailing, and a joint with a 20° inclined column and seismic reinforcement detailing. The specimens were tested under an approximately constant axial load and displacement-controlled lateral loading. Their performance was evaluated in terms of strength, stiffness, ductility, energy dissipation, hysteretic response, and damage pattern.
The results showed that, within the common loading range, the strength, stiffness, and energy dissipation index of the specimen with non-seismic reinforcement detailing decreased by 11.7%, 4.3%, and 2.9%, respectively, compared with the specimen with seismic reinforcement detailing. In comparison with specimen VC-NS, specimen IC-S-20 exhibited a 13.7% increase in strength, no change in stiffness, a 10.4% reduction in ductility, and a 17% increase in energy dissipation. Furthermore, in the specimen with the inclined column, interface cracks and diagonal cracks within the joint region progressively developed with increasing relative displacement. At a relative displacement of 8%, an interface opening of more than 1 cm and localized concrete crushing were observed. Overall, the results demonstrate that reinforcement detailing and column inclination can significantly affect the cyclic response, force-transfer mechanism, and damage mechanism of reinforced concrete beam-column joints.
Keywords:
#Keywords: Reinforced-concrete beam-column joint; inclined column; in-plane column inclination; cyclic loading; hysteretic behavior; stiffness; ductility; energy dissipation; failure mechanism. Keeping place: Central Library of Shahrood University
Visitor:
Visitor: