TA875 : Probabilistic Seismic Performance Assessment of Tall RC Buildings Equipped with baxse Isolation
Thesis > Central Library of Shahrood University > Civil & Architectural Engineering > PhD > 2026
Authors:
[Author], Hossein Pahlavan[Supervisor], mohammad Shamekhi Amiri[Supervisor]
Abstarct: Abstract Seismic baxse isolation is recognized as one of the most effective passive control strategies within the frxamework of performance-baxsed earthquake engineering. By modifying the characteristics of the input ground motion to reduce seismic demand on the superstructure, this strategy enhances structural damping and shifts the structural response to longer-period regions of the seismic spectrum, thereby improving seismic performance. However, for long-period structures such as high-rise buildings, design codes generally discourage the application of baxse isolation, since isolation often transfers these structures into the constant-acceleration region of the response spectrum after isolation. In this dissertation, with the aim of enabling the seismic isolation of high-rise structures, a modified design methodology for baxse isolation systems is proposed. This methodology is developed baxsed on the design procedures prescribed in the American loading codes for seismic isolation systems, integrated with practical implementation approaches and incorporating essential dynamic considerations, including higher-mode effects, long fundamental periods of tall buildings, and vertical axial forces transmitted from columns to isolation units. Drawing upon recent research on hybrid systems combining seismic isolation with various damping devices, as well as documented favorable seismic performance of reinforced concrete (RC) high-rise buildings equipped with buckling-restrained braces (BRBs), particularly the findings obtained in earlier stages of the present research, an RC high-rise moment-resisting frxame configuration incorporating BRBs was initially adopted. This configuration was selected to increase stiffness, reduce structural mass, and enhance damping and energy dissipation capacity, thereby overcoming the inherent limitations associated with the seismic isolation of tall buildings. After verifying the successful isolation performance of this configuration, the target structural system (namely, a special RC high-rise moment-resisting frxame equipped with seismic baxse isolation) was designed. Accordingly, baxsed on these two configurations, a total of twelve three-dimensional high-rise structural models were developed in both baxse-isolated and fixed-baxse conditions, across three height categories of 15, 25, and 35 stories. The structures were first designed using ETABS, after which detailed nonlinear models were rigorously implemented in OpenSees and subjected to nonlinear incremental dynamic analysis (IDA) using an appropriate suite of ground motion records. Acceptance criteria were selected baxsed on interstory drift ratios in accordance with HAZUS, and structural responses were extracted at various seismic intensity levels. Subsequently, seismic fragility curves were developed using validated statistical methods. The results demonstrate that baxse isolation significantly enhances structural and component capacity and stability against ground motion excitation by reducing interstory drift demands and forces in critical members. For the isolated models, the median fragility capacities corresponding to different performance levels increased by approximately 0.05g to 0.40g, while the probability of exceeding performance thresholds was reduced by 1% to 22%. Furthermore, baxsed on the residual drift ratio index (RDRI) and dissipated energy index (RE), the resilience of all structures (except for one model with a negligible exceedance) was found to be less than unity, confirming not only satisfactory seismic performance but also the self-centering capability of the structures. Consequently, the conventional limitations associated with the application of baxse isolation in high-rise buildings were effectively overcome for both configurations through the modified design methodology proposed in this dissertation. This achievement facilitates the inclusion of baxse-isolated high-rise buildings (characterized by lower structural weight, greater energy dissipation capacity, and superior seismic performance compared to fixed-baxse counterparts) into seismic design codes for the purpose of updating relevant provisions.
Keywords:
#_Performance-baxsed Earthquake Engineering (PBEE) Keeping place: Central Library of Shahrood University
Visitor: