Seyed Vahid Hosseini

Associate Professor Faculty of Mechanical Engineering

PHD of Mechanical Engineering Manufacturing

University: K.N. Toosi University of Technology
Research Interests: Nano-Manufacturing and Tribology, Mechanics of Material, Engine Structural Validation, FEM and Atomistic Simulation, Root Cause Analysis
Professional & Scientific Membership: Member of board in Society of Iranian Engine, Society of Manufacturing Engineering of Iran
Awards & Patents: Best MSc Thesis Award, Int. Conf. on Internal Combustion Engine, ICICE2007. Patent1: Online Engine Oil quality Conditioning Monitoring Sensor. Patent2: Online Ferrous Particles Detection Sensor for Combustion Engine Oil.
Biography (About):
I received my B.Sc. degree from Ferdowsi University in 2005 and my M.Sc. degree in Mechanical Engineering from Amir Kabir University of Technology in 2008. I have completed my Ph.D. degree form Department of Mechanical Engineering, Khaje Nasir Toosi University of Technology, Iran in 2013. In addition, I have experiences in some industrial research center and laboratories for more than 10 years. My area of research interest is related to structural validation under dynamic and environmental loading and FEM and MD Simulation. So various kinds of sensors/test setups are designed and manufactured in our research.

Tel:
Ext.Tel:

Scientometrics

Google Scholar
(Update: 2024-Sep-23)
367

Citations

11

h-index

14

i10-index

13

Co-authors

Scopus
(Update: 2024-May-07)
206

Citations

8

h-index

25

Co-authors

14

Documents

Courses Taught

Ms.c
Bs.c

Thesis

All Thesis (19)
Sattar Hazrati (2023), " Numerical and experimental analysis of Jamming Phenomenon in Positioning of Circular-Section Workpiece on Horizontal Surface", Msc Thesis, Shahrood University Of Technology, Hadi Parvaz[Supervisor/Supervisors], Seyed Vahid Hosseini[Advisor/ Advisors]
Sohrab Ahmadzadeh (2023), "Optimization of resistance spot welding in low carbon steel using an adhesive", Msc Thesis, Shahrood University Of Technology, Seyed Vahid Hosseini, Mostafa Hajian Heidary[Supervisor/Supervisors],
(2022), " Practical evaluation of the vertical axis wind turbine for use in the compression refrigeration cycle", Msc Thesis, Shahrood University Of Technology, mohammad Zamen, [Supervisor/Supervisors], Seyed Vahid Hosseini[Advisor/ Advisors]
Iman Rashidi (2022), "Analytical and experimental investigation of locating error of a polyhedral workpiece in the fixture", Msc Thesis, Shahrood University Of Technology, Hadi Parvaz[Supervisor/Supervisors], Seyed Vahid Hosseini[Advisor/ Advisors]
Reza Shahraki shahdabadi (2021), "Design and manufacture of electrolyzer producing hydroxy gas and investigate the effect of this gas in the combustion process", Msc Thesis, Shahrood University Of Technology, mohammad Zamen[Supervisor/Supervisors], Seyed Vahid Hosseini[Advisor/ Advisors]
Fazel Khosrowshiri (2021), " Investigation of the effect of nanoparticles in gasoline car engineoil on reducing friction and wear of parts", Msc Thesis, Shahrood University Of Technology, Seyed Vahid Hosseini[Supervisor/Supervisors], Mostafa Hajian Heidary[Advisor/ Advisors]
Seyed Ehsan Kouzehgari (2021), " Design and Construction of the Optimal System for the Production of Hydroxy Gas for the National Engine", Msc Thesis, Shahrood University Of Technology, Seyed Vahid Hosseini[Supervisor/Supervisors], mohammad Zamen[Advisor/ Advisors]
Abbas Ziaei, Seyed Vahid Hosseini (2020), "Design and Manufacturing of Industrial Online Oil Condition Monitoring Inline Sensor Using Capacitance Method ", Msc Thesis, Shahrood University Of Technology,
Hossein Khalajzadeh (2020), "High Cycle Fatigue Life Prediction of Aluminum baxse Engine Mounting and Investigation of Manufacturing Parameters on Fatigue Crack Growth Rate", Msc Thesis, Shahrood University Of Technology, Dr. Alireza Shaterzadeh, Seyed Vahid Hosseini[Supervisor/Supervisors],
Nafise Mahdiyar (2020), "Investigation the Effect of Nano Additive in Engine Oil on Friction Improvement Using Molecular Dynamics Simulation", Msc Thesis, Shahrood University Of Technology, Seyed Vahid Hosseini[Supervisor/Supervisors],
Farhad Salek (2019), "Experimental Study of Effects of Different Parameters on the Performance of Electrolyzer Producer of Hydroxy Gas and Evaluation of its on-board injection in the Internal Combustion Engine ", Msc Thesis, Shahrood University Of Technology, mohammad Zamen[Supervisor/Supervisors], Seyed Vahid Hosseini[Advisor/ Advisors]
Abolfazl Talebi (2018), "Design and Construction of Online Wear Debris Sensor for Detection of Iron Particles in Engine Oil Using Induction Field Method", Msc Thesis, Shahrood University Of Technology, Seyed Vahid Hosseini[Supervisor/Supervisors],
Sohrab Salamati (2018), "Determination of modified Drucker-Prager/Cap model parameters for KMS-92 powder baxsed on experimental and optimization methods", Msc Thesis, Shahrood University Of Technology, Seyed Hadi Ghaderi[Supervisor/Supervisors], Seyed Vahid Hosseini[Advisor/ Advisors]
(2018), "Evaluation of the activity α-amylase and serin proteases of Cydia pomonella (L.) (Lepidoptera: Tortricidae)", Msc Thesis, Shahrood University Of Technology, , Seyed Vahid Hosseini[Supervisor/Supervisors],
Mir Sadegh Akbarian Kuhkheyli (2017), "Optimization of Process Variables in Forming of Tube Fittings by Using Elastomer Tool", Msc Thesis, Shahrood University Of Technology, Mahdi Gerdooei[Supervisor/Supervisors], Seyed Vahid Hosseini[Advisor/ Advisors]
Shahab Moradi Kelardeh (2017), "Effect of Thread Manufacturing Parameters on Friction Coefficient and Fatigue Life in Cylinder Head and Journal Bearing Bolts of Marine Diesel Engine", Msc Thesis, Shahrood University Of Technology, Seyed Vahid Hosseini[Supervisor/Supervisors], Mohammad Bagher Nazari[Advisor/ Advisors]
Esmaeil Qasemi (2017), "Design and Construction of Online Oil Condition Monitoring Laboratory Sensor for Spark Ignition Engine Using Dielectric Constant Measurement Method", Msc Thesis, Shahrood University Of Technology, Seyed Vahid Hosseini[Supervisor/Supervisors],
Farshid roshandel (2015), "Investigate the parameters affecting the energy and exergy destruction in energy conversion processes in vehicle", Msc Thesis, Shahrood University Of Technology, [Supervisor/Supervisors], Seyed Vahid Hosseini[Advisor/ Advisors]
Hamed Atashzar (2015), " Numerical and experimental determination of the characteristic curves of a cylinder head gasket; a case study on a diesel engine gasket", Msc Thesis, Shahrood University Of Technology, Seyed Hadi Ghaderi, Seyed Vahid Hosseini[Supervisor/Supervisors],

Publications

Journal Papers
Conference Papers
Book