Dr. Mohammad Hassan Kayhani

Associate Professor Faculty of Mechanical And Mechatronics Engineering

Ph.D Heat and Fluids

University: Prague University
Research Interests: Heat Transfer, Combustion
Professional & Scientific Membership:
Awards & Patents:
Biography:


Tel:
Ext.Tel:

Courses Taught

Bs.c

Thesis

All Thesis (58)
Mina Mohammadi (2018), "Experimental study of particle-bubble Interaction and attachment", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Mohsen Nazari[Advisor/ Advisors]
Salman Sadeghi (2017), "Developed Actuator Line modeling of Horizontal Axis Wind Turbine under Redial Flow", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Esmail Mahmoodi[Advisor/ Advisors]
Amir Ahmad JamiAlahmadi (2017), "Pool boiling enhancement by using nanofluids", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Ahamad Nazari[Advisor/ Advisors]
Elnaz Ghaziani (2017), "Numerical Modeling of electric vacuum furnace", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Mohsen Nazari[Advisor/ Advisors]
Fatemeh Azizi (2016), "Numerical modeling of deformation of non-Newtonian droplet in a microchannel", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Mohsen Nazari[Advisor/ Advisors]
Mehran Afra (2016), "Experimental study of water flooding in Polymer Electrolyte Membrane Fuel cell", Msc Thesis, Shahrood University Of Technology, Mohsen Nazari, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors],
Amir Komeili Birjandi (2015), "An investigation on non-Newtonian drop formation in dripping regime", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani, Mahmood Norouzi[Supervisor/Supervisors],
Hanieh salehabadi (2015), "Investigation of penetration and routing of drop and liquid film in laxyered porous media", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Mohsen Nazari[Advisor/ Advisors]
Roghayeh Saemi (2015), "Numerical Investigation of 3D Viscoelastic Fluid Flow and Heat Transfer in Curved Ducts", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
Seyyed Yashar Ghorashi (2015), "Investigation of Two-Phase Flow in Microchannel", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani, Mohammad Mohsen Shahmardan[Supervisor/Supervisors], Ali Abbas Nejad[Advisor/ Advisors]
Hajar mohamadzade sani (2015), "Two phase Analysis of formation and Breakup of a fluid jet", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Mohsen Nazari[Advisor/ Advisors]
Sara Harati (2014), "Numerical simulation of Electroosmotic Flow in a microchannel using lattice Boltzmann Method", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Mohsen Nazari[Advisor/ Advisors]
Mojtaba Ashouri (2013), "Experimental study of heat transfer of Nanofluids in porous media", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani, Mohsen Nazari[Supervisor/Supervisors],
(2013), "", Ph.D Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Mohsen Nazari[Advisor/ Advisors]
Ghazal Rajabi Khorasani (2013), "Direct and Inverse Solution of Non-Fourier Problems", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Ali Abbas Nejad[Advisor/ Advisors]
Ali Jalali (2012), "Numerical simulation of 3D viscoelastic developing flow and heat transfer in the rectangular ducts", Ph.D Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
Mojtaba Khaksar (2011), "Performance Improvement of natural draft dry cooling towers under cross wind using boiler exhaust", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Ali Abbas Nejad[Advisor/ Advisors]
(2011), "", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], [Advisor/ Advisors]
(2011), "", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani, [Supervisor/Supervisors],
Azar Ajami (2011), "Air Lift Pump Simulation and Validation Whit Experimental Work", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Ali Sarreshtehdari[Advisor/ Advisors]
(2010), "", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors],
(2010), "", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors],
Amin Amiri Deloei (2010), "", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Mahmood Norouzi[Advisor/ Advisors]
(2008), "", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani, Mohamad Javad Maghrebi[Supervisor/Supervisors], Mohsen Nazari[Advisor/ Advisors]
(2007), "", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani, Mohammad Mohsen Shahmardan[Supervisor/Supervisors], [Advisor/ Advisors]
Navid Rezaei (2007), "", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Mohammad Layeghi[Advisor/ Advisors]
Iman Shalchian Tabrizi (2007), "", Msc Thesis, Shahrood University Of Technology, Mahmud Shariati, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors],
Leyla Torkaman (2007), "Energy label estimation and EER calculation of evaporative coolers", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani, Farzdi[Supervisor/Supervisors], Mohammad Mohsen Shahmardan[Advisor/ Advisors]
Ali Piri (2007), "", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Mohammadreza Heyrani Nobari[Advisor/ Advisors]
Mehdi Seraj Akbari (2007), "", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Mohammad Shahsavan[Advisor/ Advisors]
Maryam Pahlevandikht Shahjiyi (2007), "", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani, Farhad Talebi[Supervisor/Supervisors],
Mehdi Asadi (2006), "", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Farhad Talebi[Advisor/ Advisors]
Dr. Mohammad Hassan Kayhani (2005), "", Msc Thesis, Shahrood University Of Technology,
Morteza Karimi (2005), "Modeling of Rotary Heat Treatment Furnace With Zone Method", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Mohammad reza Heyrani Nobari[Advisor/ Advisors]
Mahmud Noruzi (2005), "", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors], Mohammadreza Heyrani Nobari[Advisor/ Advisors]
Abdollah Shateri (2004), "", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani[Supervisor/Supervisors],
Mohammadreza Habibzadeh (2003), "", Msc Thesis, Shahrood University Of Technology, Dr. Mohammad Hassan Kayhani, Mehdi bidabad[Supervisor/Supervisors], Mohammad sedighi[Advisor/ Advisors]

Publications

    Close
    Papers
    • Kayhani, Mohammad hassan, "''Simplified Finite Rate Method (SFRM) ", Acta Polytechnic a, Vul.39, ISSN 1210-2709, 1999
    • Kayhani, Mohammad hassan, "''Mathematicke Modelovani Spalovaciho Procesu", Energetika,Vol.4( ISSN 0375-8842), 1999
    • Kayhani, Mohammad hassan, "''Mathematicke Modelovani Ohniste Parniho Kotle ETV II", Czech Flame Day with International Flame Foundation (IFRF) Cooperation, 1999
    • Kayhani, Mohammad hassan, "“Numerical Simulation of Coal Combustion Chamber”", Proceeding of Work Shop 98 , part2, Prague, 1998
    • Kayhani, Mohammad hassan, "“The Impact of Fuel Characters Variation on Combustion Performance”", Proceeding of 16th International Power System Conference , 2001
    • Kayhani, Mohammad hassan, "• “Experimental Measurement of Aluminum Particles Flame Velocity”", Proceeding of The 8th International Conference on Mechanical Engineering”, ISME 2004, 2004
    • Kayhani, Mohammad hassan, "“Modeling and Numerical Analysis of Rotary Regenerative” Air Pre heater”", Proceeding of The first conference of fuel conservation in industry , 2004
    • Kayhani, Mohammad hassan, "“Modeling of Ljungstrom with Variable Porosity on Radial Direction”", Proceeding of “The First Iranian Conference on Eco-Energy, 2004
    • Kayhani, Mohammad hassan, ""Energy Audit Software with Its Application for a Typical Industrial”", The First Iranian Conference on Eco-Energy, 2004
    • Kayhani, Mohammad hassan, "“Impact of Cross Wind on Dry Cooling Tower Performance” ", The 9th International Conference on Mechanical Engineering, 2005
    • Kayhani, Mohammad hassan, "“Numerical Solution of Fluid Flow and Heat Transfer in Saturated Porous Channel With Viscous Dissipation”", EUROTHERM Seminar 82 Numerical Heat Transfer, 2005
    • Kayhani, Mohammad hassan, "“Cross Wind and Natural Draft Dry Cooling Towers”", EUROTHERM Seminar 82 Numerical Heat Transfer, 2005
    • Kayhani, Mohammad hassan, " “A Numerical Investigation of Internal Cooling in Gas Turbine Blades”", EUROTHERM Seminar 82 Numerical Heat , 2005
    • kayhani, Mohammad hassan, ""Numerical Modeling for Internal Cooling of Gas Turbine Blade"", The 4th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2005
    • Kayhani, Mohammad hassan, "• "Numerical Solution of Fluid Flow and Heat Transfer in Saturated Porous Channel with Viscous Dissipation"", 4th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2005
    • Kayhani, Mohammad hassan, ""Cross Wind and Natural Draft Dry Cooling Towers: Effects of Different Wind Break Walls"", The 4th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2005
    • Kayhani, Mohammad hassan, "“Heat Transfer Enhancement in Channels Using Obstacles”", Proceeding of The 10th Fluid Dynamics Conference , 2006
    • Kayhani, Mohammad hassan, "• “ Performance Improvement of Dry Cooling Tower Under Cross Wind”", 13th International Heat Transfer Conference, 2006
    • Kayhani, Mohammad hassan, "“Leakage Modeling and Test of Natural Gas Pipe Line”", The First National Specialty Conference on Gas, 2006
    • Kayhani, Mohammad hassan, "“Heat Transfer Enhancement in Channel Partially Filled with Porous Material”", Journal of Wseas Transactions on Applied and Theoretical Mechanics, 2006
    • Kayhani, Mohammad hassan, "“Numerical Analysis of Mixed Convection Heat Transfer(force and Free) of Viscoelastic Fluid in Square Channel for Laminar and Fully Developed Flow”", Wseas Transactions on Applied and Theoretical Mechanics,Volume1, 2006
    • Kayhani, Mohammad hassan, "“Heat Transfer Enhancement in Channel with Obstacles”", Wseas Transactions on Applied and Theoretical Mechanics, Vol 2, 2006
    • Kayhani, Mohammad hassan, "“Radiation Modeling In A Rotary Heat Treatment Furnace”", The 3rd BSME-ASME International Conference on Thermal Engineering, 2006