Mojtaba Ghatee

Faculty of Chemical and Materials Engineering

University:
Research Interests:
Professional & Scientific Membership:
Awards & Patents:
Biography (About):


Tel:
Ext.Tel: 2749

Scientometrics

Scopus
(Update: 2024-May-07)
264

Citations

9

h-index

43

Co-authors

Documents

Courses Taught

Bs.c

Thesis

All Thesis (35)
Mohmmad Hossein Izadifard (2023), " Preparation, Rheological Characterization and Modeling of Anisotropic Magnetorheological Elastomers under Shear Loading", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors], Mojtaba Ghatee, Mohammad Bagher Nazari[Advisor/ Advisors]
Amirmasoud Alimardan (2023), "Dynamic characterization and modeling of anisotropic magnetorheological elastomers under tensile-compressive loadings", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors], Mojtaba Ghatee, Mohammad Bagher Nazari[Advisor/ Advisors]
Farhad Ashoori (2023), "Development of surface modification method for zirconium 1% niobium alloy with the aim of achieving a uniform oxide laxyer with improved abrasion properties", Msc Thesis, Shahrood University Of Technology, Mojtaba Ghatee[Supervisor/Supervisors], , [Advisor/ Advisors]
(2021), "Investigation of hot corrosion behavior and oxidation of Zr2La2O7 / TiC self-healing thermal barrier composite", Msc Thesis, Shahrood University Of Technology, [Supervisor/Supervisors], Mojtaba Ghatee[Advisor/ Advisors]
(2021), " Synthesis of hydroxyapatite-alginate-carbon quantum dots nano-composite for biological applications", Msc Thesis, Shahrood University Of Technology, Esmaeil Salimi, Mojtaba Ghatee[Supervisor/Supervisors], Mohammad Jafar Molaei[Advisor/ Advisors]
(2021), "Fabrication of three-laxyer micro-tubes through Co-extrusion for fuel cell application", Msc Thesis, Shahrood University Of Technology, Seyed Hadi Ghaderi, Mojtaba Ghatee[Supervisor/Supervisors],
(2021), " A study electrical and mechanical properties of Ti3SiC2 MAX phase", Msc Thesis, Shahrood University Of Technology, Mojtaba Ghatee, Mohammad Jafar Molaei[Supervisor/Supervisors], Seyed Hadi Ghaderi[Advisor/ Advisors]
Amirhossein Yghoobi (2020), "Experimental investigation of the effect of shape factor on storage and loss coefficients of MR Elastomers and system identifications of these coefficients", Msc Thesis, Shahrood University Of Technology, Amir Jalali, Mahmood Norouzi[Supervisor/Supervisors], Mojtaba Ghatee[Advisor/ Advisors]
Alireza Bagheri (2019), "An experimental investigation on magnetorheological fluids stability baxsed on Surfactants ", Msc Thesis, Shahrood University Of Technology, Ali Khaleghi, Mahmood Norouzi[Supervisor/Supervisors], Mojtaba Ghatee[Advisor/ Advisors]
Loghman Namaki gharahnav (2019), "Manufacturing and characterization of microtubular solid oxide fuel cell electrolytes prepared by extrusion method", Msc Thesis, Shahrood University Of Technology, Mojtaba Ghatee, Seyed Hadi Ghaderi[Supervisor/Supervisors],
Saeed Abbasi (2019), "Investigation of the properties of Ni/YSZ composite microtubes prepared by the extrusion ", Msc Thesis, Shahrood University Of Technology, Mojtaba Ghatee[Supervisor/Supervisors],
Peyman Safarzadeh Kermani (2018), "Study of Glass-Ceramic Composite baxsed Sealant to Be Used in Solid Oxide Fuel Cells", Msc Thesis, Shahrood University Of Technology, Mojtaba Ghatee[Supervisor/Supervisors],
Hashem Dianati Nick (2018), "Design, fabrication and test of a Magnetorheological Elastomer (MRE) engine mount", Msc Thesis, Shahrood University Of Technology, Amir Jalali, Mahmood Norouzi[Supervisor/Supervisors], Mojtaba Ghatee[Advisor/ Advisors]
Majid Yusefi (2018), "Study of sol-gel derived SiC coating on alumina substrate", Msc Thesis, Shahrood University Of Technology, Mojtaba Ghatee, Mashallah Rezakazemi[Supervisor/Supervisors],
Morteza Yazdanshenas (2018), "Fabrication of ceramic insulators of an aerial engine igniter plug through cold isostatic pressing method", Msc Thesis, Shahrood University Of Technology, Seyed Hadi Ghaderi, Mojtaba Ghatee[Supervisor/Supervisors],
Niloofar Arab Baseri (2018), "Investigating the effect of bias voltage and duty cycle on surface properties of CrAlN coatings produced by cathodic arc evaporation", Msc Thesis, Shahrood University Of Technology, , Mojtaba Ghatee[Supervisor/Supervisors], Marziyeh abbasi[Advisor/ Advisors]
Navid rezaie (2017), "Investigation of Cu / Ni / YSZ Composite Characteristics as Zirconia baxse Solid Oxide Fuel cell Anode", Msc Thesis, Shahrood University Of Technology, Mojtaba Ghatee[Supervisor/Supervisors],
Mohammad Hosien Khajezade (2017), "Development of Multilxayer Thermal Barrier coatings of MCrAlY-La2O3 -YSZ on the Nickel baxse Superalloy by Using Thermal Spray and Electrophoretic Techniques", Msc Thesis, Shahrood University Of Technology, [Supervisor/Supervisors], Mojtaba Ghatee[Advisor/ Advisors]
Hassan hosseinabady (2017), "Design, fabrication and implementation of micro-slurry jet erosion test device for evaluation of the erosion properties of hard thin coatings", Msc Thesis, Shahrood University Of Technology, Seyed Hadi Ghaderi, Mojtaba Ghatee[Supervisor/Supervisors],
Seyed Hossein Mussavi Rizi (2016), "Study of mechanical properties of Zirconia-Alumina composite thin films reinforced with Carbon Nanotubes prepared by tape casting method", Msc Thesis, Shahrood University Of Technology, Mojtaba Ghatee[Supervisor/Supervisors],
Alireza Badihy Najafabadi (2016), "Feasibility of fabrication of thin dense ceramic laxyers from Zircania by 3D printing ", Msc Thesis, Shahrood University Of Technology, Mojtaba Ghatee[Supervisor/Supervisors],
Ehsan kiyumarsi (2016), "Parametric dynamic modeling and control of magnetorheological damper, considering temperature effects", Msc Thesis, Shahrood University Of Technology, Amir Jalali, Mahmood Norouzi[Supervisor/Supervisors], Mojtaba Ghatee[Advisor/ Advisors]
Saeed Vaezi (2015), "Experimental Investigation of Elastic Properties Effects on Viscous Fingering Instability", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi, Ali Jabari Moghadam[Supervisor/Supervisors], Mojtaba Ghatee[Advisor/ Advisors]
Rahmatollah Kherad (2015), "Feasibility of manufacturing of zirconia baxsed micro solid oxide fuel cell by electrophoretic method", Msc Thesis, Shahrood University Of Technology, Mojtaba Ghatee[Supervisor/Supervisors],
Fariborz Jalali (2015), "Design, Manufacturing and Coating Optimization of Tungsten Carbide spiral drill for drilling SAMAND brake caliper", Msc Thesis, Shahrood University Of Technology, Mojtaba Ghatee[Supervisor/Supervisors],
Reza Salmani (2015), "Investigation of the effect of number of forming passes on the microstructure and mechanical properties of zirconium alloy in equal channel angular pressing", Msc Thesis, Shahrood University Of Technology, Seyed Hadi Ghaderi[Supervisor/Supervisors], Mojtaba Ghatee[Advisor/ Advisors]
Farid Salari (2014), "Feasibility of preparation of zirconia baxsed tubular electrolyte by screen printing method", Msc Thesis, Shahrood University Of Technology, Mojtaba Ghatee[Supervisor/Supervisors],
Hassan Salihi (2014), "Manufacturing of yttria stabilized zirconia baxsed ceramic thin films by tape casting method to be used in solid oxide fuel cells", Msc Thesis, Shahrood University Of Technology, Mojtaba Ghatee, Mahdi Gerdooei[Supervisor/Supervisors],
Sadegh Mohammadi (2014), "Design and Fabrication of Smart Damper with Magnetorheological Hydraulic Oil", Msc Thesis, Shahrood University Of Technology, Mahmood Norouzi[Supervisor/Supervisors], Mojtaba Ghatee[Advisor/ Advisors]
Soodeh Dodangei (2013), " Preparation of tubular zirconia baxsed solid electrolyte by electrophoretic deposition", Msc Thesis, Shahrood University Of Technology, Mojtaba Ghatee, Seyed Hadi Ghaderi[Supervisor/Supervisors],
Mohsen Ghorban (2013), "Tape casting, Polymer Impregnation, Alumina/zirconia composite, Thin film", Msc Thesis, Shahrood University Of Technology, Mojtaba Ghatee, Seyed Hadi Ghaderi[Supervisor/Supervisors],
Omid Sam Daliri (2013), "Preparation and characterization of CNT/ alumina/ zirconia nano-composite via a coating and consolidation technique", Msc Thesis, Shahrood University Of Technology, Seyed Hadi Ghaderi, Mojtaba Ghatee[Supervisor/Supervisors],
Saeed Eshghi (2013), "Numerical Estimation of Cavitations’ Destructive Effect ", Msc Thesis, Shahrood University Of Technology, Ali Sarreshtehdari[Supervisor/Supervisors], Mojtaba Ghatee[Advisor/ Advisors]
Ali samaee nia (2012), "Numerical Simulation of effects of faults due to environmental elements on E3 gas turbine performance ", Msc Thesis, Shahrood University Of Technology, Mahmood Mehregan, Mojtaba Ghatee[Supervisor/Supervisors],
Fatemeh Bagheri (2011), "Fabrication and Investigation of Mechanical Properties of mextal baxsed NanoComposite Materials ", Msc Thesis, Shahrood University Of Technology, Hamid Haratizadeh[Supervisor/Supervisors], Mojtaba Ghatee[Advisor/ Advisors]

Publications

Journal Papers
Conference Papers
Book